6. Press applicable key to enter the first letter of the
name of the group you want to reference in the di-
rectory.
Example: Press the [ 2 ( MEM )] key repeatedly to
toggle among the seven available characters asso-
ciated with that key: 2 2 2 2 2
If you enter a wrong character, pres the [ CLR ] key
to delete the wrong character.
7. Press the [ ENT ] key to store the first letter in the name.
8. Repeat steps 6 and 7 to complete the name. The name can consist of up
to 11 characters. If you do not use all 11 characters, press the [ ENT ] key to
move to the next space. This method can also be
used to enter a blank space in the name. If you en-
ter a wrong character, press the [ H/L ] key until the
wrong character is selected, then enter the correct
character.
9. After the 11th letter or space has been entered, press and hold the [ ENT ]
key to advance to the Group MMSI (Maritime Mo-
bile Service Identity Number) number entry.
10. Enter the desired number. If you enter a wrong num-
ber, press the [ H/L ] key until the wrong number is
selected, then enter the correct number.
11. To store the data entered, press and hold the [ ENT ]
key.
12. To enter another group address, repeat steps 4
through 11.
13. Press the [ CLR ] key twice to return to the "Radio Setup
the [ CLR ] key again to return to radio operation.
11.7.2 Transmitting a Group Call
Using Pre-Programmed Vessel
1. Press the [ CALL ( MENU )] key to show the "DSC
Call Menu
Call Menu
Call Menu
Call Menu
Call Menu."
2. Turn the CHANNEL selector knob to select
Group." (To cancel, press the [ CLR ] key.)
"Group
Group
Group
Group
3. Press the [ ENT ] key. The transceiver beeps,
and the "Group directory" appears.
4. Turn the CHANNEL selector knob to select the
"Group" you want to contact.
5. Press the [ ENT ] key, then turn the CHANNEL
selector knob to select the operating channel you
FM-4000
A A A A A
B B B B B
C C C C C
a a a a a
b b b b b
2 2 2 2 2 ....
c c c c c
Radio Setup" menu, then press
Radio Setup
Radio Setup
Radio Setup
DSC
DSC
DSC
DSC
Page 47