How To Program Features - Omega Freedom 400 Owner's Manual

The 6 programmable features, described on the previous two pages, are very
easily programmed by the following procedure:
Step 1: The system must be connected to power and ground, and be disarmed.
Step 2: Press and hold either transmitter's "Disarm" and "Small" buttons together
for 4 seconds; the system will chirp 5 times confirming entry to Features
Programming Mode.
Step 3: Within 10 seconds of entering Features Programming Mode, press and
release the transmitter's Small Button the number same of times that
equals the number of the feature to be programmed. After a pause, the
system will repeat the feature number with a like number of siren chirps.
Step 4: After the system acknowledges the feature to be programmed, press
either the "Arm" Button to turn the feature on (the system's response will
be 1 chirp), or the "Disarm" Button to turn the feature off (the system's
response will be 2 chirps).

How to Program Features

Page 19