Omega Freedom 400 Owner's Manual page 4

The Status Indicator Light and the LED Status Indicator Light are supplied with the
Freedom-400 system kit, but are not absolutely necessary for the system's
operation. Therefore, these items may or may not be present with your system.
Most imortantly, consult with the installer; if the Valet/Override Switch is installed,
as to the location of this switch.
The Valet/Override Switch: This switch can be used to turn "Off" the alarm
portion of the system, by placing the system into "Valet Mode". The Valet/Override
Switch can also be used in conjunction with the vehicle's ignition key to perform
an "Emergency Override" of the system should the transmitter be lost or become
inoperable. Both of these operations are explained on pages 13-16, and as noted
above this switch may or may not be present with your system.
The LED Status Indicator Light: The LED Indicator shows the status of the
system and serves as a visual deterrent to break-ins and theft. See page 16 for
a detailed description of the Status Indicator Light's operations, and as noted at
top of this page, this light is not necessary for the system's operations, and may
or may not be present with your system.
Both of the above items may be located in a special combination holder, which is
supplied with the Freedom-400 system kit.
Page 5