Other Transmitter Operations - Crime Guard 328i4 Operation Manual

The Remote Panic feature is designed for situations in which the user feels
threatened and/or in need of attracting attention.
• Remote Panic allows you to activate the siren and flashing lights from
the transmitter, with the enhanced choice of having the doors lock, or
unlock when doing so.
• Remote Panic can be activated anytime, whether the vehicle's ignition is
turned on or off, and has a 30 second duration (60 seconds is optional)
unless it is deactivated earlier by using the transmitter.
• At the end of the Remote Panic cycle the system will reset, enter the
armed state, and lock the doors (even if it was originally activated with
the Upper Right "Unlock" Button).

OTHER TRANSMITTER OPERATIONS

The previous sections have described only the most basic everyday opera-
tions of your Crime Guard system. The transmitter is also capable of sev-
eral other optional functions.
The transmitter can also silently arm or disarm the system. Pressing the
Lower Left Button twice simply reverses, or "toggles" the armed or dis-
armed condition of the system, without the normal confirmation chirps.
An Auxiliary Channel #2 is available for optional uses (consider that
the transmitter operates on the first channel to arm and disarm the system).
Auxiliary Channel #2 is also capable of disarming the system, also unlock-
ing the doors; thus it is ideally suited for remote trunk release.
To Silently Arm or Disarm the System:
Press & Release the Lower Left Button ( ) Twice
Silent Arming and Silent Disarming are both operated by double-pressing the same transmitter button.
Press
2 X
Page 12
THE SIREN THE PARKING LIGHTS
WILL NOT WILL FLASH ONCE IF
CHIRP ARMING, TWICE IF
DISARMING
THE DOORS WILL LOCK IF
ARMING, UNLOCK IF DISARMING
• Repeat this Step 6 for each additional feature until all features
are programmed.
Step 7 Turn the vehicles's ignition on or allow 10 seconds to pass without
performing any programming actions.
• The siren will sound briefly and the Status Light will go out to
confirm that the system has exited Programing Mode.
The pages following explain each of the programmable features in detail,
and below is a convenient feature programming checklist, which greatly
simplifies the feature programming process.
# FEATURE
#1 SecureCode Programming
#2 30 / 60 Second Activated Alarm Cycle
#3 3 / 45 Second Arming Delay
#4 Last Door Arming
#5 Automatic Rearming
#6 Auxiliary Output #2 Also Disarms System
#7 Parking Light Illumination Upon Disarm
#8 Doors Lock At Ignition "On"
#9 Doors Unlock At Ignition OFF
#10 Not used on this model
#11 Open Door Bypass To Features 8, 9, 10
#12 Doors Lock With Last Door Arming
#13 Doors Lock With Automatic Rearming
#14 Ignition-Activated Vehicle Recovery
#15 Door-Activated Vehicle Recovery
#16 Transmitter-Activated Vehicle Recovery
#17 Chirp Confirmation
#18 Steady Siren or Pulsed Horn Output
#19 Soft or Loud Horn Confirmation Chirps
#20 1 or 2 Button Arming / Disarming
#21 Double Unlock Pulse
#22 Total Closure Lock Output
Page 21
DEFAULT
1 Press (n/a)
30 Seconds (U)
3 Seconds (L)
OFF (U)
OFF (U)
ON (L)
ON (L)
ON (L)
ON (L)
ON (L)
OFF (U)
OFF (U)
OFF (U)
OFF (U)
OFF (U)
ON (L)
Steady Siren (U)
"Medium Loud" (:)
2 Button (U)
OFF (U)
OFF (U)