Table of Contents
Advertisement
2. Clean up spill with wet cloth.
Large Spills
1. Remove sources of ignition.
2. Wear protective gear: respirator, rubber gloves, goggles (see below)
3. Clean up spill with scoop, being careful not to generate a lot of dust.
Waste Disposal: Follow appropriate federal, state and local
regulations.
Safe Handling and Use
Respiratory Protection: Not normally required. For large spills, use NIOSH-approved full face
with HEPA cartridge during cleanup.
Protective Gloves and/or Eye Protection: Not normally required. For large spills, use rubber
chemical worker's goggles during cleanup.
Ventilation: Outside of normal ventilation, not normally required.
Other Protective Equipment and/or Hygienic Practices: None
Special Precautions
Precautions for Handling or Storage: Protect from high heat. Avoid making dust.
Other Precautions: None
The information contained in this MSDS is based on data considered accurate; however, no warran
implied regarding the accuracy of these data or the results to be obtained from the use thereof. Ven
responsibility for injury to vendee or third person party proximately caused by the product if reasona
procedures are not adhered to as stipulated in the MSDS. Furthermore, vendor assumes no respon
vendee or third person party proximately caused by abnormal use of the product even if reasonable
procedures are followed. Additionally, vendee assumes the risk of his use of the product.
OKI OL600/610ex(96-01-19)
May-95
Advertisement
Table of Contents
