Table of Contents
Advertisement
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHIELD
For more information, contact Okidata at:
532 Fellowship Road
Mount Laurel, NJ 08054
Emergency Information: 1-800-OKIDATA
EMERGENCY FIRST AID PROCEDURES
Emergency
Toner
swallowed
(ingested)
NEVER give anything by mouth or attempt to induce vomiting in a person who is unconscious.
Toner
inhaled
Toner gets
in the eyes
Note
Hazardous Ingredients
Styrene-Butyl Acrylate Copolymer (91% by weight)
CAS# 25767-47-9
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Carbon Black (5-7% by weight)
CAS# 1333-86-4
OSHA TWA 3.5 mg/m3
ACGIH TLV 3.5 mg/m3
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
OSHA PEL 15.0 mg/m3 for total dust
ACGIH TLV 10.0 mg/m3 for total dust
Note
This product is not regulated under Section 313 of SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
OKI OL600/610ex(96-01-19)
OL e Series Toner
MSDS # 58093101
Procedure
Dilute by giving two glasses of
water and induce vomiting by
administering Syrup of Ipecac (follow manufacturer's instructions). Seek medical
attention.
Remove person to fresh air.
Seek medical attention.
Flush eyes with large quantities of cool
water for 15 minutes, keeping the eyelids open with fingers. Seek medical attentio
Small amounts of toner on skin or clothing can easily be removed with soap and c
water. Hot water makes toner harder to remove.
Advertisement
Table of Contents
