Maintenance - Panasonic SC-NT10 Owner's Manual

THE FOLLOWING APPLIES ONLY
IN THE U.S.A.
FCC Note:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment
and receiver.
≥ Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: To assure continued compliance,
follow the attached installation instructions and
use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-NT10
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of
North America
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY
IN CANADA.
CAN ICES-3(B)/NMB-3(B)
THE FOLLOWING APPLIES IN THE
U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of this device.
FCC ID:ACJ-SC-NT10
IC: 216A-SCNT10
This transmitter must not be co-located or
operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very low
levels of RF energy that is deemed to comply
without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed
and operated keeping the radiator at least 20 cm
7
(7 / q) or more away from person's body
8
(excluding extremities: hands, wrists, feet and
ankles).

Maintenance

Turn off the power of this unit and wipe with dry soft
cloth. Disconnect the USB cable when the USB cable
is used.
• When it get very dirty, wipe off dirt with a cloth
immersed in water and wrung strongly, and then
wipe with dry soft cloth.
• Solvents such as benzine, thinner, alcohol, oil,
detergents, etc., may cause the external case to be
altered or the coating may come off, so do not use
them.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
A nickel metal hydride battery
that is recyclable powers the
product you have purchased.
Please call 1-800-8-BATTERY
for information on how to
recycle this battery.
VQT5A86
3