Cisco ONS 15327 Manual page 35

OPR-PROTNSW-<OCN_TYPE>
INIT-REG-<MOD2>
RTRV-PM-<MOD2>
REPT ALM BITS
REPT ALM SYNCN
REPT ALM <MOD2ALM>
REPT ALM EQPT
REPT EVT <MOD2ALM>
REPT ALM EVT
REPT EVT SYNCN
RTRV-ALM-BITS
RTRV-ALM-SYNCN
RTRV-BITS
RTRV-COND-ALL
RTRV-COND-BITS
RTRV-COND-SYNCN
RTRV-CRS-<STS_PATH>
RTRV-CRS-VT1
RTRV-ALM-EQPT
RTRV-COND-EQPT
RTRV-ALM-MOD2
RTRV-COND-MOD2
RTRV-ALM-ALL
RTRV-EC1
RTRV-FFP-EQPT
RTRV-INV
RTRV-LOG
RTRV-<OCN_TYPE>
OL-2671-01
Added support for the SWITCH command field.
Added support for an optional Location field. Now only one comma is needed
(instead of two) after the Time Period field.
Output – The Condition description field is now optional.
The Description and Equipment Type fields are now optional.
The positions of the Description and Equipment Type fields have changed.
Output – Condition and Condition Description are now optional. Requires 7
commas (instead of 6) after the Condition Effect field. Added support for the Aid
Type field.
Output – Added support for the Aid Type field.
Output – Added support for the Sync Messaging field.
One less comma is needed after the Condition field.
Requires two commas (instead of three) after the Condition field.
Semi-colons after the CTAG are no longer required.
Use one less comma after the Service Affect field.
The four colons after the CTAG field are now optional.
Output – Added support for the Rx Equalization field.
Output – Name field in Name/Value parameters changed.
Output – Requires two colons (instead of one) after the Aid Type field.
Requires an additional logname field.
The four colons after the CTAG field are now optional.
Output – Added support for the following fields: Sync Status Messaging, Send DUS,
Ring ID, and BLSR Type. Dropped support for Revertive Time.
New Features and Functionality
Release Notes for Cisco ONS 15327 Release 3.3
35