Cisco ONS 15327 Manual page 34

New Features and Functionality
Release 1.0.X TL1 Commands Changed as of Release 3.3
TL1 COMMAND
ALW-MSG-ALL
INH-MSG-ALL
ALW-SWDX-EQPT
DLT-CRS-<STS_PATH>
DLT-CRS-VT1
ED-BITS
ED-EC1
ED-T1
ED-T3
ED-<OCN_TYPE>
ENT-CRS-<STS_PATH>
ENT-FFP-<OCN_TYPE>
ED-FFP-<OCN_TYPE>
ED-EQPT
ENT-EQPT
RTRV-EQPT
ED-USER-SECU
ENT-USER-SECU
ED-<STS_PATH>
INIT-SYS
OPR-LPBK-<MOD2_IO>
RLS-LPBK-<MOD2_IO>
Release Notes for Cisco ONS 15327 Release 3.3
34
DESCRIPTION OF CHANGES
The two commas at the end of the command are not needed anymore.
Semi-colons after the CTAG field are not required anymore.
Trailing semi-colons after the CTAG are optional.
Added support for the Sync Message field. An extra colon is needed after CTAG
field. The colon after the PST field is not necessary. The Name string in Name/Value
parameter changed.
Added support for the Rx Equalization attribute for an EC1 port. The extra colon
after the PST field is not required anymore.
Removed support for the ID field. Three colons after the CTAG field are now
required, instead of two. The extra colon after the PST field is not required anymore.
Added support for Test Access.
Three colons are needed after CTAG field, instead of two. The extra colon after the
PST field is not required anymore. Added support for Test Access.
Added support for the send DUS and Synchronous Status Message fields. The extra
colon after the PST field is not required anymore. Three colons are needed after the
CTAG field instead of two.
Cross-connect types are optional. The default is 2WAY. Supported Cross Connect
types are now limited to 1WAY and 2WAY.
An extra colon after the CTAG field is required. Name field in name/value
parameters have changed.
This family of commands was functionally expanded to edit/enter/retrieve
equipment attributes and electrical 1:1 and 1:N Protection Group. Use these
commands instead of ED/ENT/RTRV-FFP-EQPT.
Added support for a NEW USER ID field. Fields are now positional instead of
name/value pairs.
An extra comma is needed after the PASSWORD field.
Added support for following fields: Revertive Mode, Revertive Time, Expected Path
Trace, Path Trace Message, and Path Trace Mode. Added support for Test Access.
Phase Field (Level of Initialization) is not supported anymore.
The Loopback Type field is now optional.
OL-2671-01