Cisco ONS 15327 Manual page 36

New Features and Functionality
RTRV-<STS_PATH>
RTRV-SYNCN
RTRV-TOD
RTRV-T1
RTRV-T3
SET-TOD
SW-DX-EQPT
TL1 Commands New for ONS 15327 Release 3.3
Refer to the TL1 Command Guide for new command descriptions.
Note
CATEGORY
BLSR
ENVIRONMENT
Release Notes for Cisco ONS 15327 Release 3.3
36
Output – Added support for the following fields: Revertive Mode, Revertive Time,
Expected Path Trace, Path Trace Message, Incoming Path Trace, Path Trace Mode
and Test Access.
Output – Replaced the Primary, Secondary, and Third fields with Rank of
Synchronization Reference, Value of a Sync Ref, Quality of Sync Source, and Status
of Signal Source.
Output – Requires one comma (instead of two) after the Seconds field.
The four colons after the CTAG field are now optional.
Output – Dropped support for the ID field.
The Name string in the Name/Value parameter has been changed from USEDST to
DST
The comma after the optional Mode field is no longer necessary.
COMMAND
ED-BLSR
RTRV-BLSR
RTRV-COND-RING
REPT ALM RING
REPT COND RING
REPT EVT RING
RTRV-ALM-RING
RTRV-ALM-COND
RTRV-ATTR-CONT
RTRV-ATTR-ENV
RTRV-EXT-CONT
SET-ATTR-CONT
SET-ATTR-ENV
OPR-EXT-CONT
REPT EVT ENV
RTRV-COND-ENV
REPT EVT COM
RLS-EXT-CONT
OL-2671-01