Cisco ONS 15327 Manual page 30

New Features and Functionality
CTAGs
In accordance with Telcordia GR-831, all TL1 commands must include a CTAG. Commands without
CTAGs will be rejected by TL1 with the error Invalid Correlation Tag (IICT).
Test Access
TL1 Test Access enables you to monitor and test circuits. Commands to connect, disconnect and change
the test access (TACC) and test access connections have been added to TL1 for ONS 15327 Release 3.3.
Refer to the Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, Release 3.3 for more
information.
Additional Feature Support
The following feature enhancements have been added to TL1 for Release 3.3.
•
•
•
New Alarms as of ONS 15327 Release 3.3
The following TL1 alarms are new as of ONS 15327 Release 3.3:
•
•
New AIDs as of ONS 15327 Release 3.3
TL1 supports the following new AIDs as of ONS 15327 Release 3.3.
•
•
Parameter Value Changes as of ONS 15327 Release 3.3
TL1 supports the following parameter value changes as of ONS 15327 Release 3.3.
•
•
•
•
•
•
New Conditions as of ONS 15327 Release 3.3
TL1 supports the following new conditions as of ONS 15327 Release 3.3.
Release Notes for Cisco ONS 15327 Release 3.3
30
Support for STS9c and 24c
Enhanced Setting of Timing Source (RTRV-NE-GEN, ED-NE-GEN)
Support for reporting database changes
PEER-NORESPONSE
MFGMEM
BLSR
ALL (added to the VT1_5 AID table)
TMPER input/output value changed from 15MIN to 15-MIN
SENDDONOTUSE changed to SENDDUS
BLSR_MODE (new parameter)
BLSR_TYPE (new parameter)
MOD-TACC
TACC-MODE
OL-2671-01