Cisco ONS 15327 Manual page 31

•
•
The following new BER alarm conditions have been added:
Condition
SD-L
SD-P
SF-L
SF-P
Conditions Replaced as of ONS 15327 Release 3.3
The SWFTDWN condition has been changed to SFTWDOWN.
Changed Conditions as of ONS 15327 Release 3.3
The following condition is changed as of ONS 15327 Release 3.3.
The FAIL_DS3_NE_FRM_MISMATCH condition is renamed to DS3-MISM.
New Parameters as of ONS 15327 Release 3.3
The following TL1 parameters are new in the Condition table (new conditions) as of ONS 15327 Release
3.3:
The following TL1 parameters are new in the ALL_MONTYPE table as of ONS 15327 Release 3.3:
•
•
•
OL-2671-01
NHSWPR - Inhibit switch to protect request on equipment
NHSWWKG - Inhibit switch to working request on equipment
EQPT-MISS — Replaceable equipment/unit is missing
EXERCISE-RING-FAIL — Exercise ring failed
EXERCISE-SPAN-FAIL — Exercise span failed
EXERCISE-RING-REQ — Exercise ring request
EXERCISE-SPAN-REQ — Exercise span request
EXERCISING-RING — Exercise ring completed
EXERCISING-SPAN — Exercise span completed
FE-EXERCISING-RING — Far end exercise ring completed
FE-EXERCISING-SPAN — Exercise span completed
WTR-RING — SONET ring is in Wait to Restore state
CVS
ESS
SESS
Alarm Description
BER Threshold exceeded for
Signal Degrade
BER Threshold exceeded for
Signal Degrade
BER Threshold exceeded for
Signal Failure
BER Threshold exceeded for
Signal Failure
Release Notes for Cisco ONS 15327 Release 3.3
New Features and Functionality
Type
Line
Path
Line
Path
31