Table of Contents
Advertisement
Chapter 2
Getting Started
Port number, if other than the default value. Default port numbers for the IP camera are 443 for
•
HTTPS and 80 for HTTP. The IP camera administrator can configure an HTTPS port and an HTTP
port as described in the
Your user name and password for the IP camera. The IP camera administrator configures user names
•
and passwords as described in the
To access the IP camera windows, perform the following these steps.
Before you Begin
The Microsoft .NET Framework version 2.0 or later must be installed on the PC that you use to connect
to the IP camera. You can download the .NET Framework from the Microsoft website.
Procedure
Start Internet Explorer and enter the following in the address field:
Step 1
protocol://ip_address:port_number
where:
•
protocol is HTTPS for a secure connection or HTTP for a non-secure connection. You can use
HTTP only if you configure the camera to accept non-secure HTTP connections as described in the
"Performing the Initial Setup of the IP Camera" section on page
ip_address is the IP address of the IP camera. The default IP address is 192.168.0.100.
•
port_number is the port number that is used for HTTPS or HTTP connections to the IP camera. You
•
do not need to enter a port number if you are connecting through the default HTTPS port 443 or the
default HTTP port 80.
For example,
Enter the following for a secure connection if the IP address is 192.168.0.100 and the HTTPS port
•
number is 443:
https://192.168.0.100
Enter the following for a secure connection if the IP address is 203.70.212.52 and the HTTPS port
•
number is 1024:
https://203.70.212.52:1024
Enter the following for a non-secure connection if the IP address is 203.70.212.52 and the HTTP
•
port number is 80:
http://203.70.212.52
Enter the following for a non-secure connection if the IP address is 203.70.212.52 and the HTTP
•
port number is 1024:
http://203.70.212.52:1024
Enter your IP camera user name and password in the Username and Password fields, then click Login.
Step 2
To log in as the IP camera administrator, enter the user name admin (which is case sensitive) and the
password that is configured for the administrator. To log in as a user, enter the user name and password
that are configured for the user.
The Home window for the IP Camera appears.
OL-25230-02
"Account Initialization Window" section on page
"User Settings Window" section on page
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
Accessing the IP Camera
3-28.
3-30.
2-5.
2-7
Advertisement
Table of Contents
