1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Saw
  5. 40315
  6. Owner's manual & safety instructions

Chicago Electric 40315 Owner's Manual & Safety Instructions

Portable wet cutting tile saw
Hide thumbs Also See for 40315:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18l

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 40315

Summary of Contents for Chicago Electric 40315

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 40315...
  • Page 3 It’s safer than using your hand and it frees both hands to operate tool. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 40315 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Page 4 For technical questions, please call 1-888-866-5797. Item 40315...
  • Page 5 Spreader – A metal plate that follows the saw blade to keep the kerf (gap) from closing on the saw blade. Spreaders, except riving knives, must be aligned to the blade after blade adjustment to prevent binding. Item 40315 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 30°-40° of the stick to keep hands out of the line of the blade. • The lower lip of the notch must be no longer than the workpiece is thick. Page 6 For technical questions, please call 1-888-866-5797. Item 40315...
  • Page 7 Do not touch plug with wet hands. which cannot be built into this product, but must be supplied by the operator. Item 40315 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Vibration Safety

    120 VAC / 60 Hz / Electrical Rating 4.8A Single Phase Tilting Head 45° for Bevels No-Load Speed 3,550 RPM Table Size 15-3/4" x 16-1/2" 1 Spanner Wrench Accessories 1 Nut Driver Page 8 For technical questions, please call 1-888-866-5797. Item 40315...

  • Page 9: Setup

    7. Replace the Front Cover, Rear Blade Cover, Screws, Tile Saw to the workbench, using four appropriate Washers, and Tray in the reverse order of removal. length bolts, lock washers, and nuts (not included). Item 40315 For technical questions, please call 1-888-866-5797. Page 9...

  • Page 10: Operation

    The power cord must reach the work area with enough extra length to allow free movement while working. 3. Secure loose work pieces using clamps (not included) to prevent movement while working. Page 10 For technical questions, please call 1-888-866-5797. Item 40315...

  • Page 11: General Operating Instructions

    12. Store Saw in a safe, clean, dry location out of reach of children and other unauthorized people. Blade Guard (49) Table (51) Rip Fence (53) Tray (17) Power Switch (21) Star Knob (20) Lock Lever Figure a Item 40315 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Maintenance

    10. cautiOn! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 40315...

  • Page 13: Troubleshooting

    3. Running with hot/warm water. 3. Always run with cold water. cutting clean Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 40315 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 40315...
  • Page 15 Item 40315 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents