Relay Recording - Canon LEGRIA HFM406 Instruction Manual

Relay Recording

You can activate the relay recording so if the memory you are using
becomes full while recording movies, the recording will continue unin-
terrupted on a memory card.
When recording on memory card X, you can use memory card Y for
relay recording (497).
memory, you can choose to use only memory card X for relay record-
ing (f94), or use both memory cards (f9497).
Operating modes:
1 Insert a memory card that contains no video recordings into the
card slot of the memory card you want to use for relay recording.
• When relay recording from the built-in memory (
card slot X or both memory card slots.
• When relay recording from memory card X: memory card slot
Y only.
2 Activate the relay recording.
[FUNC.]
[f] (
option*
* The approximate available recording time will now reflect the combined space in
the memories used for relay recording.
NOTES
• You cannot use relay recording from the built-in memory to mem-
ory card Y. When using a single memory card, be sure to insert it into
memory card slot X.
• There will be a momentary stop in the scene at the point where the
camcorder switches from one memory to another.
• Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder's operating mode.
- Changing the memory used for recording movies.
8 8
[MENU]
only) or [4]
8
[a]
only: When recording in the built-in
8
8
[Rec Media for Movies]
8 [Relay Recording] 8Desired
only): memory
8
Preparations
37