Canon LEGRIA HFM406 Instruction Manual page 148

• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start (Standby)] setting.
[Quick Start (Standby)]: Select whether to activate the Quick Start function
(0 46) when you close the LCD panel in a recording mode and the
length of time after which the camcorder will end the standby mode and
shut off automatically.
• You can set Quick Start to [Off], for example, if the camcorder is set on
a fixed position and you want to keep recording video with the LCD
panel closed in order to conserve the battery's power.
[Battery Info]:
Displays a screen where you can verify the battery charge
(as a percentage) and the remaining recording time (
playback time (
[Control for HDMI]:
trol) function. When you connect the camcorder to an HDTV compatible
with HDMI-CEC using the supplied HDMI cable, you can control the cam-
corder's playback using the remote control of the TV.
• If set to [A On], when the camcorder is connected to a compatible
HDTV using the supplied HDMI cable, the video input on the TV will
automatically be set to the camcorder's video input. Then, you can use
the up/down/left/right buttons and the OK or SET button on the TV's
remote control to play back your recordings.
• Depending on the TV set, additional settings may be required on the TV
itself to activate the HDMI-CEC function. Refer to the TV's instruction
manual.
• Correct operation of the HDMI-CEC function cannot be guaranteed
even when connecting the camcorder to compatible TV sets. If you
cannot use the remote control of the TV, set [Control for HDMI] to
[B Off] and operate the camcorder directly or use the camcorder's
wireless controller.
• The remote control of the TV can only be used to play back movies or
photos (
TV while it is set to a recording mode, depending on the TV used, turn-
ing off the TV will automatically turn off the camcorder even if it is
recording at the time.
• We recommend not connecting more than 3 HDMI-CEC compatible
devices at a time.
[HDMI 1080p Output]:
nected to an HDTV that supports the 1080p standard using the supplied
HDMI cable, your video recordings (made in 1080i) will be converted and
output as 1080p.
148
Additional Information
, mode).
Activates the HDMI-CEC (Consumer Electronics Con-
or mode only). If the camcorder is connected to the
If set to [A On], when the camcorder is con-
, mode) or