Canon Vixia HF M41 Instruction Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Camcorder
  5. VIXIA HFM41
  6. Instruction manual

Canon Vixia HF M41 Instruction Manual

Hd camcorder with accessories
Hide thumbs Also See for Vixia HF M41:
Table of Contents

Advertisement

Quick Links

See also: Quick Manual
PUB. DIE-0387-000A
HD Camcorder

Instruction Manual

Y

Advertisement

Table of Contents
loading

Related Manuals for Canon Vixia HF M41

Summary of Contents for Canon Vixia HF M41

  • Page 1: Instruction Manual

    PUB. DIE-0387-000A HD Camcorder Instruction Manual...

  • Page 2: Important Usage Instructions

    HD Camcorder, VIXIA HF M40 A / VIXIA HF M41 A / VIXIA HF M400 A systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. CAUTION: • Danger of explosion if the wrong type of batteries are attached. Use only the same type of batteries.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon HD Camcorder VIXIA HF M40 A / VIXIA HF M41 A / VIXIA HF M400 A and all its accessories. Read these instructions. Keep these instructions.
  • Page 5 Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
  • Page 6 Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
  • Page 7 Trademark Acknowledgements • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. •...

  • Page 8: Exciting Features And New Functions

    “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines). Video is recorded at this resolution only when the recording mode is set to MXP or FXP mode.

  • Page 9: Image Stabilization

    Shoot or capture short scenes and arrange them into a video clip set to your favorite background music. Face Detection (0 93) The camcorder automatically detects people’s faces and adjusts the focus and other settings accordingly for beautiful results. (0 48)
  • Page 10 * Refer to the instruction manual of the device. Depending on the device used, cor- rect playback may not be possible even if the device is AVCHD-compatible. In such case, play back the recordings on the memory card using the camcorder. Play video...

  • Page 12: Table Of Contents

    Setting the Date and Time Changing the Language Changing the Time Zone Using a Memory Card Memory Cards Compatible for Use with the Camcorder Inserting and Removing a Memory Card Selecting the Memory for the Recordings Relay Recording Initializing the Memory...
  • Page 13 AUTO Mode Basic Recording Shooting Video and Taking Photos in AUTO Mode About the Smart AUTO function Zooming Quick Start Function Video Basic Playback Playing Back Video 3D Flip View The Index Selection Screen: Selecting the Content to Play Back Deleting Scenes and Stories Video Stories and Cinema Style Using Story Creator to Create Compelling Stories...
  • Page 14 Dividing Scenes Photos Viewing Photos Deleting Photos Slideshow External Connections 126 Terminals on the Camcorder Connection Diagrams 130 Playback on a TV Screen 131 Saving and Sharing Your Recordings Copying Recordings to a Memory Card Saving Recordings on a Computer...
  • Page 15 FUNC. Panel Setup Menus 161 Appendix: Onscreen Icons and Displays 165 Trouble? Troubleshooting List of Messages 179 Do’s and Don’ts Handling Precautions Maintenance/Others Using the Camcorder Abroad 186 General Information Accessories Optional Accessories Product Codes Specifications Index Table of contents...

  • Page 16: About This Manual

    About this Manual Thank you for purchasing the Canon VIXIA HF M41 / VIXIA HF M40 / VIXIA HF M400. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0 165).
  • Page 17 The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. Photos: In record pause mode, touch [PHOTO]. The camcorder will record the photo after a 10-second countdown*. The countdown appears on the screen. * 2 seconds when using the wireless controller.

  • Page 18: Getting To Know The Camcorder

    Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder: Introduction CA-570 Compact Power Adapter (incl. power cord) BP-808 Battery Pack WL-D89 Wireless Controller (incl. CR2025 lithium button battery) Stylus Pen HTC-100/S HDMI Cable...
  • Page 19 VideoBrowser for managing, editing, and playing back movies. • Y Instruction Manual/Photo Applications Ver.35*/Music Data/ Image Mix Data CD-ROM (referred in the manual as “Camcorder Sup- plemental Disc”). Contains the following components. - Instruction Manual - The full-version instruction manual of the camcorder (this PDF file).

  • Page 20: Names Of Parts

    Names of Parts Left side view Right side view A d A f Front view Introduction 1 2 (camera/play) button (0 33) 2 VIDEO SNAP (video snapshot) button (0 68) (Story Creator button) (0 65) 4 DISP. (onscreen display) button (0 30, 116)/ BATT.
  • Page 21 Top view LCD panel S q Mini advanced shoe (0 110) S a Zoom lever (0 51) S s POWER button S d ON/OFF (CHG) (charge) indicator: Green – ON Orange – Standby (0 53) Red – Charging (0 24) S f Remote sensor (0 26) S g LCD touch screen (0 29, 32) S h POWERED IS button (0 91)/...
  • Page 22 Back view Bottom view Introduction S j Battery attachment unit (0 24) S k START/STOP button (0 46) S l DC IN terminal (0 24) D q RESET button (0 169) D a Dioptric adjustment lever* (0 31) D s Viewfinder* (0 31) D d VIEWFINDER button* (0 31) D f BATTERY RELEASE switch (0 25) D g Tripod socket (0 180)
  • Page 23 Wireless Controller WL-D89 1 START/STOP button (0 46) 2 b (index selection) button (0 59) Press and hold for more than 2 seconds to switch between shooting and playback mode. 3 MENU button (0 35, 149) 4 DISP. (onscreen display) button (0 116) 5 SET button 6 B (stop) button (0 55)

  • Page 24: Preparations

    The camcorder can be powered with a battery pack or directly using the compact power adapter. The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is com- pletely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately.
  • Page 25 Be sure to wait until the green ON/OFF (CHG) indicator goes out. • Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recom- mended for use with this camcorder.

  • Page 26: Preparing The Accessories

    0 °C to 40 °C (32 °F to 104 °F), charging will not start. • The battery pack will be charged only when the camcorder is off. • If the power supply was disconnected while charging a battery pack, make sure the ON/OFF (CHG) indicator has gone out before restoring the power supply.
  • Page 27 1 Lift the padded handgrip’s flap and detach the strap from the Velcro pad. 2 Pull the strap to remove it first from the front bracket on the camcorder, then to unthread it from the handgrip and finally to remove it from the rear bracket on the camcorder. Fasten the grip belt.
  • Page 28 To attach an optional wrist strap Attach the wrist strap to the rear bracket on the camcorder, adjust the length and fasten. You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection.

  • Page 29: Adjusting The Position And Brightness Of The Lcd Screen

    To allow the subject to monitor the LCD screen while you use the viewfinder. - To include yourself in the picture when recording with the self timer. - To allow the camcorder to be operated with the wireless controller from the front. 180°...
  • Page 30 LCD Backlight When recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight to make it brighter. With the camcorder on, hold h pressed down for more than 2 seconds. Repeat this action to switch the LCD backlight between off (normal) and on (bright).

  • Page 31: Using The Viewfinder

    Using the Viewfinder If it is difficult to use the LCD screen even after turning on the LCD backlight, you can use the viewfinder. You can also use the viewfinder when you rotate the LCD panel 180 degrees to let the subject watch the recording.

  • Page 32: Basic Operation Of The Camcorder

    IMPORTANT • The camcorder uses a pressure-sensitive touch screen. Press firmly when using touch operations. • In the following cases, you may not be able to perform touch operations correctly.

  • Page 33: Operating Modes

    Playback Press the camera/play button S to switch the cam- corder between camera (recording) mode and playback mode. You can press S when the camcorder is off to turn it on directly in playback mode. Operating mode Playing back movies (0 55).

  • Page 34: Using The Menus

    Using the Menus Many of the camcorder’s functions can be adjusted from the FUNC. panel and the setup menus. For details about the available menu options and settings, refer to the appendix Menu Options Lists (0 146). FUNC. Panel Operating modes: The FUNC.
  • Page 35 Setup Menus Operating modes: * In mode setup menus cannot be accessed and most menu settings will be reset to default values. mode only: Touch [FUNC.] 2 Touch [MENU] to open the setup menus. You can also press u on the wireless controller.

  • Page 36: First Time Settings

    • You can adjust the date and time later on with the 6 setting. • When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge completely and the date and time setting may be lost. In such case, recharge the built-in lithium battery (0 182) and set the time zone, date and time again.

  • Page 37: Changing The Language

    Changing the Language The default language of the camcorder is English. You can set it to one of 26 other languages. Operating modes: [FUNC.]* [MENU] Desired language * Only when performing the procedure in a recording mode. NOTES • Some control buttons, such as [ZOOM], [FUNC.] or [MENU], will appear in English regardless of the language selected.
  • Page 38 4 Touch [a] to close the menu. Preparations...

  • Page 39: Using A Memory Card

    We recommend using memory cards rated SD Speed Class 4, 6 or 10. SDXC Memory Cards You can use SDXC memory cards with this camcorder. When using memory cards with other devices, such as digital recorders, computers and card readers, make sure that the external device is compatible with SDXC cards.
  • Page 40 Compatible operating systems for SDXC memory cards Operating system Compatibility Windows 7 Compatible Windows Vista Compatible (requires Service Pack 1 or later) Windows XP Compatible (requires Service Pack 3 and KB955704 update) Mac OS X Not compatible IMPORTANT • If you use an SDXC memory card with a computer OS that is not SDXC- compatible, you may be prompted to format the memory card.

  • Page 41: Inserting And Removing A Memory Card

    • Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a mal- function of the camcorder. Be sure to insert the memory card as described in step 3.

  • Page 42: Selecting The Memory For The Recordings

    Selecting the Memory for the Recordings You can select to record your movies and photos in the built-in mem- ory ( only) or on a memory card. The default memory for recording both is the built-in memory ( Operating modes: POINTS TO CHECK •...

  • Page 43: Relay Recording

    X. • There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another. • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder.

  • Page 44: Initializing The Memory

    (image mix frames). Operating modes: 1 Power the camcorder using the compact power adapter. Do not disconnect the power source or turn off the camcorder until the initialization is completed. 2 Initialize the memory.
  • Page 45 Software Guide (PDF file) of the supplied PIXELA’s software. - Mac OS users: Use Finder to transfer music files from the [MUSIC] folder on the supplied Camcorder Supplemental Disc to the memory About the music files card. Refer to the memory card.

  • Page 46: Auto Mode

    Please read the IMPORTANT section (0 49) before using an Eye-Fi card. Operating modes: POINTS TO CHECK • Before you begin recording, make a test recording first to check that the camcorder is operating correctly. 1 Set the mode switch to 2 Turn on the camcorder. To record video Press to begin recording.
  • Page 47 • You can record photos simultaneously while recording a movie. • You can also press j on the wireless controller. When you have finished recording 1 Make sure that the ACCESS indicator is off. 2 Turn off the camcorder. 3 Close the LCD panel. AUTO Mode...

  • Page 48: About The Smart Auto Function

    - Decoration (0 69) to add a fun personal touch using stamps, drawings, image mix and more. About the Smart AUTO function mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then adjust various settings (focus, exposure, color, image stabilization, image quality, among others), selecting the best set- tings for the scene you want to shoot.
  • Page 49 Failing to do so may result in permanent data loss or damage to the memory. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. Bright...
  • Page 50 • Be sure to save your recordings regularly (0 131), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. • Photos recorded on an Eye-Fi card in memory card slot Y will be uploaded automatically after setting the camcorder to playback mode, if you are within the range of a configured network.

  • Page 51: Zooming

    Operating modes: There are three ways you can zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using the zoom controls on the touch screen. In addition to the 10x optical zoom, in...
  • Page 52 Using the Touch Screen’s Zoom Controls 1 Display the zoom controls on the touch screen. [FUNC.] • The zoom controls appear on the left side of the screen. 2 Touch the zoom controls to operate the zoom. Touch anywhere within the Q area to zoom out or anywhere within the P area to zoom in.

  • Page 53: Quick Start Function

    ON/OFF (CHG) indicator is lit in orange). NOTES • The camcorder will not enter standby mode if the LCD panel is closed while the ACCESS indicator is on or flashing, while a menu is being dis- played or while using the viewfinder ( also not enter standby mode when the battery charge is too low.
  • Page 54 • About standby mode and auto power off: - The camcorder will power off automatically if left in standby mode for 10 minutes. Press x to turn on the camcorder. - You can select the length of time until shut-off or turn off the Quick Start function altogether with the [Quick Start (Standby)] setting.

  • Page 55: Video

    Video This chapter covers functions related to movies, including play- back, advanced shooting, using Story Creator and other advanced functions. For details about basic video shooting, refer to AUTO Mode (0 46). Basic Playback Playing Back Video Operating modes: 1 Press S. You can also press and hold B on the wireless controller for more than 2 seconds to...
  • Page 56 A Memory being read. B Recording date. C Division line between recording dates. D Drag your finger left for the next index page*. E Drag your finger right for the previous index page*. F Open the index selection screen (0 59). G 3D Flip View (0 59).
  • Page 57 During playback: A Jump to the beginning of the scene. Double-tap to jump to the previous scene. B Jump to the beginning of next scene. C Pause the playback. D Fast playback* backward/forward. E Display the volume (0 57) and background music mix balance (0 77) controls.
  • Page 58 - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. • You may not be able to play back with this camcorder movies recorded on a memory card using another device.

  • Page 59: 3D Flip View

    3D Flip View Touch [ ] in the date index screen to switch to 3D Flip View. This fun way of displaying scenes grouped by recording date in a 3D layout can be useful to flip through a large number of recordings. A Recording date.
  • Page 60 In any index screen, touch [b]. During single photo view, touch the screen once to display the controls then touch [Q] to open the [Photos] index screen. A Touch the tab of the desired memory: built-in memory only), memory card X or memory card Y. B Touch a control button to select the content you want to play back.

  • Page 61: Deleting Scenes And Stories

    Two playback modes: the date index screen vs. the gallery In the date index screen you can find all the movies you have recorded, conveniently organized by recording date. When you play back scenes from the date index screen they will be played back in chronological order.
  • Page 62 2 Delete the scenes. [Edit] [Delete] * When you select [Select], perform the following procedure to select the individ- ual scenes you want to delete before touching [Yes]. ** Touch [Stop] to interrupt the operation while it is in progress. Some scenes may be deleted nevertheless.
  • Page 63 4 Delete the scene. [Yes] Deleting Scenes from a Story by Rating 1 Open the information screen of the story that contains the scenes you want to delete. front [Story Details] 2 Open the rating selection screen. [Edit Story] 3 Touch one or more of the rating buttons to select all the applicable scenes.
  • Page 64 • Observe the following precautions while the ACCESS indicator is on or flashing (while scenes are being deleted). - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. NOTES •...

  • Page 65: Video Stories And Cinema Style

    • Initially, the current date will be used as the story’s title, but you can change it (0 82) before pressing [Yes]. • A new story will be created and the camcorder will enter record pause mode. The selected story scene category will appear at the bottom of the screen.
  • Page 66 To exit Story Creator mode Press and touch [Yes]. NOTES • When recording video snapshot scenes, you can have the camcorder automatically link the length of video snapshot scenes to the recom- mended length of story scenes with the 8 Length] setting.

  • Page 67: Cinema Mode And Cinema-Look Filters

    3 Drag your finger up/down to select a category and touch the orange frame on the right (number of scenes). The camcorder will enter record pause mode and the selected story scene category will appear at the bottom of the screen.

  • Page 68: Video Snapshot

    [8: Memory] [9: Dramatic B&W] NOTES • Photos cannot be recorded while the camcorder is set to Video Snapshot Record a series of short scenes. Then, play back your video snapshot scenes set to your favorite music (0 77) to create your own fun music video.

  • Page 69: Decoration: Adding A Personal Touch

    (the blue frame serves as a visual progress bar) and then automatically returns to record pause mode. • When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released. NOTES • Changing the camcorder’s operating mode will deactivate the video snapshot mode.
  • Page 70 Decorating Scenes while Recording Operating modes: 1 Open the decoration screen. [FUNC.] • The decoration screen will open automatically also when you stow the LCD panel with the touch screen facing out. 2 Use a tool from the toolbar as explained in the following procedures.
  • Page 71 ( To load a previously saved canvas In the decoration screen: [fLoad] or [4Load] • The camcorder will apply the last freehand drawings and stamps that were saved in the built-in memory ( only). To use [Animated Stamps] 1 Touch [ The [Animated Stamps] screen will appear.
  • Page 72 3 Touch anywhere on the canvas to place the selected animated stamp. You can also drag the animated stamp to a different location. To use [Captions] 1 Touch [ The [Captions] screen will appear. 2 Touch [Date] or [Time]. When recording a scene using Story Creator, you can also select [Title] (the story’s title) or [Story Scene] (the story scene category).
  • Page 73 Mixing Your Own Images with Live Video You can use images you make on your computer for the image mix (Chroma Key) function. Make sure that the image you want to use has a blue or green area, which will be replaced by the live video using Chroma Key mixing.

  • Page 74: Playing Back Stories From The Gallery

    2 Touch the screen to display the playback controls. 3 Touch [ ] to open the decoration screen. 4 Decorate the scene using the tools from the toolbar as explained in the previous section. In playback mode, the decorations will not be saved with the original recording.
  • Page 75 4 Touch the story’s thumbnail to start the playback. • The complete story will be played back from the first scene to the last. When playback ends, the camcorder will return to the gallery. • Touch the screen to display the playback controls. Touch [ display the scene's category during playback.

  • Page 76: Rating Scenes

    - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. Rating Scenes You can rate story scenes immediately after recording them (0 48) or during playback.

  • Page 77: Playback With Background Music

    Operating modes: Using One of the Supplied Music Tracks as Background Music The supplied Camcorder Supplemental Disc contains 3 music tracks you can use as background music. pre-installed in the built-in memory.
  • Page 78 A Select the desired music track. B Adjust the background music balance. C Play back the original sound (no background music). D Delete the music track selected. E Listen to the music track selected. Touch again (B) to stop the playback. 3 Adjust the mix balance between the original sound and the background music.
  • Page 79 POINTS TO CHECK • You will need a commercially available audio cable with at least one mini-stereo plug (to connect to the MIC terminal on the camcorder); the other end will depend on external player used). 1 Open the gallery or date index screen.
  • Page 80 ( pre-installed in the built-in memory will be restored after it is initialized.) To transfer music files from the supplied Camcorder Supplemental Disc to the memory card: - Windows users: Use the supplied PIXELA’s software. For details, refer to the Software Guide (PDF file) of the supplied PIXELA’s software.

  • Page 81: Copying And Moving Scenes Within/Between Stories

    Copying and Moving Scenes Within/Between Stories You can copy and move scenes in the gallery within the same story scene (category), between story scenes in the same story, and between stories recorded in the same memory. Operating modes: 1 Open the list of scenes of the story that contains the scene you want to copy or move.

  • Page 82: Selecting A Story's Thumbnail Image

    Selecting a Story’s Thumbnail Image Initially, the image used as the story’s thumbnail is the first frame of the first scene in the story. You can set your favorite scene as the thumb- nail that will represent the story in the gallery. Operating modes: 1 Open the gallery.
  • Page 83 1 Open the gallery. 2 Select the story whose title you want to change. Drag your finger right/left to bring the desired story to the front. 3 Open the [Edit Title] screen. [Story Details] 4 Use the virtual keyboard to change the title. 5 Touch [OK] A Switch between letters and numbers/special characters.

  • Page 84: Advanced Functions

    Failing to do so may result in permanent data loss or damage to the memory. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode. Video...

  • Page 85: Selecting The Video Quality (Recording Mode)

    • Be sure to save your recordings regularly (0 131), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. • Photos recorded on an Eye-Fi card in memory card slot Y will be uploaded automatically after setting the camcorder to playback mode, if you are within the range of a configured network.
  • Page 86 VideoBrowser to create AVCHD discs*. • The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the content of the scenes. • The camcorder retains the last setting used even if you set the cam- corder to mode.

  • Page 87: Selecting The Frame Rate

    Selecting the Frame Rate You can change the frame rate (the number of frames recorded per second) to change the look of your movies. Operating modes: [FUNC.] [MENU] Desired frame rate Options [C 60i (Standard)] frame rate of NTSC analog TV signals. [o PF30] Shooting at 30 frames per second, progressive*.
  • Page 88 Options ( Default value) Portrait] The camcorder uses a large aper- ture, to achieve a sharp focus on the subject while blurring the background. Sports] To record sports scenes such as tennis or golf. Night Scene] lower noise. Snow] To record in bright ski resorts without the subject being underexposed.
  • Page 89 - Autofocus may not work as well as in other modes. In such case, adjust the focus manually. • [M Fireworks]: To avoid camcorder blur (blur due to the camcorder moving) we recommend using a tripod. • [r Underwater]/[s Surface]: - Use these recording programs when making recordings while the camcorder is in the optional WP-V3 Waterproof Case.

  • Page 90: Advanced Image Stabilization

    - p will appear on the screen when the camcorder’s temperature becomes too high. If this happens, turn off the camcorder, take it out of the waterproof case and keep it in a cool place until the temperature goes down. If the camcorder becomes too hot, it will turn off automatically.
  • Page 91 • You can change the operation of the Y button (long press or toggle on/off) with the 6 NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • For surveying and following shots, when you pan the camcorder from...

  • Page 92: Pre-Recording

    The scene recorded in the memory will start 3 seconds before g was pressed. NOTES • The camcorder will not record the full 3 seconds prior to pressing g if the button was pressed within 3 seconds of having turned on pre-recording or having finished the previous recording.

  • Page 93: Face Detection

    [A On o] To select the main subject If there is more than one person in the picture, the camcorder will auto- matically select one person it determines is the main subject. The main subject is indicated by a white face detection frame and the camcorder will optimize the settings for that person.

  • Page 94: Touch & Track

    When recording a group of people using face detection, the camcorder will automatically detect one person as the main subject. You can use Touch & Track to tell the camcorder to track and optimize settings for a different person. You can also use Touch & Track to always keep in focus other moving subjects, such as pets or moving vehicles.

  • Page 95: Faders

    - When shooting indoors with insufficient lighting. Faders The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording.

  • Page 96: Manually Setting The Shutter Speed Or Aperture

    [B Shutter-Pri. AE] and set the shutter speed to 1/100. Video [B Shutter-Pri. AE] or [y] or [A]* to set the desired The camcorder automatically adjusts the Set the shutter speed value. The camcorder Set the aperture value. The camcorder auto-...

  • Page 97: Adjusting The Exposure

    • [C Aperture-Pri. AE]: The actual range of values available for selection will vary depending on the initial zoom position. • When setting a numeric value (aperture or shutter speed), the number displayed will flash if the aperture value or shutter speed is not appropri- ate for the recording conditions.

  • Page 98: Manual Exposure Adjustment

    • The manual adjustment dial appears and the adjustment value is set at ±0. • Touch [y] again to return the camcorder to automatic exposure. 3 Touch [y] or [A] or drag your finger along the dial to set the exposure adjustment value.

  • Page 99: Automatic Gain Control (Agc) Limit

    • If the recording program is changed during exposure lock, the cam- corder will return to automatic exposure. • When shooting subjects with a strong light source behind them, the camcorder automatically corrects for the backlight*. You can turn off the automatic backlight correction with the 7 rection] setting.
  • Page 100 • The manual focus controls and an estimate of the current focusing distance appear. • Touch [2] again to return the camcorder to autofocus. 3 Touch and hold [l] or [W] to adjust the focus. • The center of the screen will be magnified to help you focus more easily.

  • Page 101: Tele Macro

    Tele Macro Using tele macro, the camcorder can focus at a shorter distance (up to 40 cm (1.3 ft.) from the subject at full telephoto), allowing you get closer shots of small subjects like flowers and insects. This function also adds a soft focus to the background, so the subject not only looks larger but it also stands out more.

  • Page 102: White Balance

    Point the camcorder at a white object, so it fills the whole screen, and touch [Set WB]. When the adjustment is completed, The camcorder will retain the custom white balance even if you turn it off. Options ( Default value) [Y Automatic] ance for natural looking colors.

  • Page 103: Image Effects

    NOTES • When you select the custom white balance: - Set 7 [Digital Zoom] to [B Off]. - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, g may keep flashing. The result will still be better than with [Y Automatic].

  • Page 104: Self Timer

    - Pressing j (on the wireless controller) or touching [PHOTO] (on the screen), when recording photos. - Turning off the camcorder. - Changing the camcorder’s operating mode. - Closing the LCD panel to set the camcorder to standby mode. Video [Self Timer]...

  • Page 105: Audio Recording Level

    When 7 audio level indicators will appear, the top one for the built-in microphone, and the bottom one for the external audio. • Touch [z Automatic] to return the camcorder to automatic audio recording levels. External audio...

  • Page 106: Built-In Microphone Directionality

    7 ting (or [Surround Mic Attenuator] when the optional SM-V1 Surround Microphone is attached to the camcorder). • We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.

  • Page 107: Audio Equalizer

    Wide] Stereo recording of ambient sound over a more exten- sive area that adds to the sense of presence of movies. Zoom] Stereo recording with the sound linked to the zoom position. The larger the subject appears on the screen, the louder the sound will be.

  • Page 108: Audio Mix

    Boost HF+LF Range] music and clearly capture the special sound characteristics of a variety of instruments. Audio Mix When recording, you can mix audio from the built-in microphone with external audio from the MIC terminal and adjust the mix balance for original sound effects.

  • Page 109: Using Headphones

    Using Headphones Use headphones for playback or to check the audio level while record- ing. The headphones are connected to the AV OUT/X terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to X (headphones) output.

  • Page 110: Using The Mini Advanced Shoe

    AV output when you turn off the camcorder. Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (0 186).

  • Page 111: Using An External Microphone

    Using an External Microphone When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder’s internal machinery. In such case, we recommend using an external microphone. Operating modes: Using the SM-V1 Surround Microphone or DM-100 Directional Stereo...
  • Page 112 You can also mix and record audio from the WM-V1 with audio from the built-in microphone. 1 Attach the receiver to the camcorder’s grip belt. 2 Connect the receiver to the camcorder’s MIC terminal. 3 If necessary, activate the audio mix function (0 108) and adjust the audio mix balance.

  • Page 113: Using An External Video Light

    [Audio Mix] setting. NOTES • When an external microphone is connected to the camcorder, 7 [Wind Screen] will automatically be set to [B Off Z]. • If the audio level is too high and the sound gets distorted, adjust the...

  • Page 114: Using A Zoom Remote Controller

    Remote Controller. Doing so will allow you to use certain functions while viewing the picture on an external monitor without touching the camcorder. This is particularly useful while the camcorder is mounted on a tripod and you want to ensure maximum stability of a shot.

  • Page 115: Selecting The Playback Starting Point

    Selecting the Playback Starting Point If you have a very long scene, you may want to start playing back the scene from a certain point. You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes.

  • Page 116: Onscreen Displays And Data Code

    Touch the screen to display the playback controls. About the Data Code With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). You can select the information to be displayed with the y / z [Data Code] setting.

  • Page 117: Capturing Photos And Video Snapshot Scenes From A

    1 Play back the scene or story from which you want to capture the video snapshot scene. 2 Press The camcorder captures the video snapshot scene for about 4 seconds (the blue frame serves as a visual progress bar), and then enters playback pause mode. You can change the length of the video snapshot scenes you capture to 2 or 8 seconds with the 8 [Video Snapshot Length] setting.
  • Page 118 • During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene. Capturing Photos You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed.

  • Page 119: Dividing Scenes

    • [B Photo Sequence]: - Up to 100 photos can be captured at a time. - The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). - Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a frame rate of [ Dividing Scenes...
  • Page 120 - Video snapshot scenes and other scenes that are too short (less than 3 seconds). - Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder. • Scenes cannot be divided within 1 second from the beginning or the end of the scene.

  • Page 121: Viewing Photos

    Photos Refer to this chapter for details on viewing photos and other photo-related operations. Viewing Photos Operating modes: 1 Press S. 2 Open the [Photos] index screen, if it is not displayed. [Photos] 3 Look for the photo you want to play back. Move the zoom lever toward Q to show 15 photos per page;...
  • Page 122 A Memory being read. B Drag your finger left for the next index page.* C Drag your finger right for the previous index page*. D Open the index selection screen (0 59). E Division line between recording dates. * While browsing through index pages, a scroll bar will appear at the bottom of the screen for a few seconds.

  • Page 123: Deleting Photos

    Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.

  • Page 124: Slideshow

    • Be careful when deleting photos. Deleted photos cannot be recovered. • Photos that were protected with other devices cannot be deleted with this camcorder. Slideshow You can play a slideshow of all the photos and even set it to music.
  • Page 125 2 Select the background music to use during the photo slideshow. Music tracks: Step 2 (0 77). External audio: Steps 2 - 4 (0 79). Slideshow set to a music track 3 Touch the photo that will open the slideshow to display it in single photo view.

  • Page 126: Terminals On The Camcorder

    The component video terminal is for video only. When you use connection B, do not forget the audio connections using the AV OUT/X terminal. * When connecting a cable to the camcorder, make sure to align the triangle marks on the cable’s connector and on the camcorder’s terminal.

  • Page 127: Connection Diagrams

    HDMI terminal, you can enjoy video and audio playback at the highest quality. - The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder.

  • Page 128: External Connections

    Connection B Type: Analog Quality: High Definition Output only Connect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on the camcorder: [AV/Headphones] to [H AV] STV-250N Stereo Video Cable Connection C Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals.
  • Page 129 - To write back scenes recorded with this camcorder that were previously saved on a computer. - To transfer music files from the supplied Camcorder Supplemental Disc to a memory card in the camcorder in order to use them as background music. USB Cable...

  • Page 130: Playback On A Tv Screen

    Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Playback on an HDTV using one of the high-definition con- nections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV.

  • Page 131: Copying Recordings To A Memory Card

    Saving and Sharing Your Recordings Copying Recordings to a Memory Card You can copy your recordings only one way: from the built-in memory only) or from memory card X to memory card Y. Scenes and photos will be copied from the index screen or from a story in the gallery on the source memory to the same index screen or story on memory card Y.
  • Page 132 Options [date] Copy all the scenes recorded on the date shown in the con- trol button. [Select] Select individual scenes to copy. [All Scenes] Copy all the scenes. Copying Scenes from a Story by Rating 1 Open the gallery and bring the desired story to the front. •...
  • Page 133 3 Copy the photo. [Edit] [Copy (f97)] ( (497)] 4 Drag your finger left/right to select another photo to copy or touch [a]. Copying Photos from the Index Screen Operating modes: 1 Open the [Photos] index screen. Check that you have selected the f tab (built-in memory, only) or 4 tab (memory card X).

  • Page 134: Saving Recordings On A Computer

    Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.
  • Page 135 Connecting the Camcorder to a Computer 1 Power the camcorder using the compact power adapter. If the camcorder is connected to the computer while it is powered only by the battery pack, previously saved video files cannot be transferred back to the camcorder and music files cannot be transferred from the supplied Camcorder Supplemental Disc to a memory card in the camcorder.
  • Page 136 - Do not open the double memory card slot cover and do not remove the memory cards. - Do not access, change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data...
  • Page 137 USB cable, without having to install the supplied software Photo Application. • If you connect the camcorder to the computer while it is set to mode, the process of creating scene thumbnails will start automatically.

  • Page 138: Copying Recordings To An External Video Recorder

    In Standard Definition You can copy your movies by connecting the camcorder to a VCR or a digital video recorder with analog audio/video inputs. Video output will be in standard definition, although the original scenes are in high defi- nition.

  • Page 139: Uploading Movies To Video Sharing Web Sites

    • We recommend powering the camcorder using the compact power adapter. • Verify that 6 3 Camcorder: Locate the scene or story you wish to copy and pause the playback shortly just before the desired scene. 4 Camcorder: Resume playback.
  • Page 140 PIXELA’s software. Converting Scenes into Standard Definition from the Date Index Screen Operating modes: 1 Power the camcorder using the compact power adapter. 2 Make sure there is a memory card in memory card slot Y with sufficient available space.
  • Page 141 [Bit Rate (Quality)] To automatically divide scenes (step 5) If you are converting a long scene, you can have the camcorder divide it into 10-minute SD movies to make uploading easier. [Auto Divide] ] to adjust the volume [Yes].
  • Page 142 Software Guide (PDF file). IMPORTANT • While the camcorder is connected to the computer, do not open the double memory card slot cover and do not remove the memory cards. • Observe the following precautions while the ACCESS indicator is on or flashing.
  • Page 143 Converting Scenes into Standard Definition from a Story by Rating 1 Open the gallery and bring the desired story to the front. • Check that you have selected the f tab (built-in memory) or 4 tab (memory card X). 2 Select the rating of the stories you want to convert. [Story Details] 3 Press Z and continue the conversion to standard definition from step 5 in the previous procedure (0 140).
  • Page 144 Wireless upload on standby - g (animated) Wireless upload in progress - i [Eye-Fi Communication] is set to [B Off] - h Wireless upload stopped by the camcorder ( - o Error reading from the Eye-Fi card ( IMPORTANT Using an Eye-Fi Card •...
  • Page 145 • While using an Eye-Fi Card, the ACCESS indicator may flash from time to time. • Wireless communication is available only in playback mode. Any wire- less transfer in progress will be stopped if you set the camcorder to recording mode. • Wireless communication is not available when the optional WM-V1 Wireless Microphone is attached to the camcorder.

  • Page 146: Appendix: Menu Options Lists

    Additional Information This chapter contains troubleshooting advice, screen mes- sages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (0 34). For details about each function, see the reference page.
  • Page 147 Control Button [X Focus] [2] (manual focus): Toggle on ( ) or off ( ), Touch AF frame [e Exposure] [y] (manual exposure): Toggle on ( ) or off ( ), Touch AE frame [ZOOM] Zoom controls, [START]/[STOP] control ] (tele macro): Toggle on ( ) or off ( ) [c Mic.
  • Page 148 Edit Panel - Mode Date Index Control Button date [Copy (497)] < [All Scenes] [Copy (f97)] date < [Convert HD9SD [All Scenes] (497)] [Convert HD9SD (f97)] date [Delete] < [All Scenes] [Divide] [Edit Story] from Control Button the [Story Details] screen by scene rating [Copy (497)] <...

  • Page 149: Setup Menus

    [Edit Story] from Control Button Details] screen [Edit Title] [Copy] [Move] [Divide] [Rating] Operation not available for recordings on memory card Y (7 tab). Operation not available for the two preexisting stories, [Unsorted] and [Video Snap- shot]. Edit Panel - Mode Control Button [Copy (497)]*...
  • Page 150 Attenuator] Option available only for recording movies. Option available only when the optional SM-V1 Surround Microphone is attached to the camcorder after having updated the camcorder’s firmware using the mem- ory card supplied with the SM-V1. Additional Information Setting options...
  • Page 151 • When the optional Wide-converter or Tele-converter is attached to the camcorder, it may partially obstruct the Instant AF sensor. Set the AF mode to [S Normal AF]. • When the recording program is set to [r Underwater] or [s Surface], the AF mode is automatically set to [S Normal AF].
  • Page 152 • This menu option is not available when the optional SM-V1 Surround Microphone is attached to the camcorder. In that case, activate the microphone attenuator with the [Surround Mic Attenuator] setting. • When the recording program is set to [r Underwater] or [s Surface], the microphone attenuator is automatically set to [B Off].
  • Page 153 [B Off], [i Dissolve], [j Slide Image] Transition] [TV Type] [F Normal TV], [G Wide TV] Option not available when the camcorder is connected to an HDTV using the sup- plied HDMI cable. [Data Code]: Displays the date and/or time when the scene or photo was recorded.
  • Page 154 8 Recording & Connections Setup Menu item [A On n], [B Off] [Self Timer] [Video Snapshot [i 2 sec], [j 4 sec], Length] [l 8 sec], [Story Length-Based]: Toggle on ( ) or off ( ) [Rate Scenes [A On], [B Off] (Recording)] [Rec Media for Movies]...
  • Page 155 • Use this function to record video only when you intend to play back your recordings on an HDTV compatible with x.v.Color, connected to the camcorder using the supplied HDMI cable. If recordings made with x.v.Color are played back on a non-compatible TV, colors may not be reproduced correctly.

  • Page 156: System Setup

    [b Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the camcorder. • If the memory card you insert already contains a photo with a larger number, a new photo will be assigned a number one higher than that of the last photo on the memory card.
  • Page 157 Menu item [POWERED IS [x Press and Hold], Button] [y Toggle On/Off] [Autostart [A On], [B Off] Decoration] [Power Saving [Auto Power Off]: Mode] [B Off], [A On] [Quick Start (Standby)]: [Off], [10 min], [20 min], [30 min] [f Built-in Mem.]*, [Initialize f/g] [4 Mem.
  • Page 158 [Eye-Fi [O Automatic], [B Off] Communication] Option not available when the camcorder is connected to an HDTV using the sup- plied HDMI cable. Option available only after having inserted an Eye-Fi card into memory card slot Y. [Output Onscreen Displays]: onscreen displays will appear also on the screen of a TV or monitor con- nected to the camcorder.
  • Page 159 • You can set Quick Start to [Off], for example, if the camcorder is set on a fixed position and you want to keep recording video with the LCD panel closed in order to conserve the battery’s power.
  • Page 160 ( TV while it is set to a recording mode, depending on the TV used, turn- ing off the TV will automatically turn off the camcorder even if it is recording at the time. • We recommend not connecting more than 3 HDMI-CEC compatible devices at a time.

  • Page 161: Appendix: Onscreen Icons And Displays

    Appendix: Onscreen Icons and Displays Recording Movies (using Story Creator) 1 Control button [FUNC.]: Open the FUNC. panel (0 34) 2 Smart AUTO (0 48) 3 Face detection frame (0 93) 4 Touch & Track frame (0 94) 5 Control button [PHOTO]: Take a photo (0 46, 84, 118) 6 Control button [ list of story scenes (0 65)
  • Page 162 Recording Movies y Manual mode A g Recording program (0 87, 96) A h Manual exposure (0 98) A j R Instant AF/S Normal AF (0 151), MF Manual focus (0 99) A k Face detection (0 93) A l White balance (0 102) S q Audio level indicator (0 105) S a x.v.Color (0 155) S s While recording/during playback:...
  • Page 163 Playing Movies (during playback) F d Playback control buttons (0 57) F f External audio input (0 79) F g Eye-Fi wireless communication (0 144) Viewing Photos F l Control button [MENU]: Open the setup menus (0 149) G q Control button [Edit]: Open the Edit panel (0 149) G a Current photo / Total number of photos...

  • Page 164: Additional Information

    • Depending on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately. • When the camcorder is off, press R to display the charge status of a battery pack. The Intelligent System will display the charge status (as a percentage) and the remaining recording time (in minutes) for 5 seconds.

  • Page 165: Troubleshooting

    - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists. CHECK THIS FIRST Power supply •...
  • Page 166 Canon for use with this camcorder cannot be charged using this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
  • Page 167 - The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with the camcorder. Consult a Canon Service Cen- ter.
  • Page 168 - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings (0 61, 123) to free some space on the memory card.
  • Page 169 - An error occurred when trying to access control data on the Eye-Fi card. Turn the camcorder off then on again. If the icon appears often, there might be a problem with the Eye-Fi card. Contact the card manufacturer’s customer care.
  • Page 170 - The memory card is full. Delete some recordings (0 61, 123) to free some space or replace the memory card. - Initialize the memory card (0 44) when you use it with the camcorder for the first time. - The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi- tion of the LOCK switch.
  • Page 171 The computer does not recognize the camcorder even though the camcorder is connected correctly. - Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection. - Connect the camcorder to a different USB port on the computer.

  • Page 172: List Of Messages

    Cannot communicate with the battery pack. Continue using this battery pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack.
  • Page 173 - Use the supplied software VideoBrowser to save the scene and divide it on the computer. Cannot enter standby mode now - The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge or replace the battery pack (0 24).
  • Page 174 - Cannot access the memory card. Check the memory card and make sure it is inserted cor- rectly. - A memory card error occurred. The camcorder cannot record or display the image. Try remov- ing and reinserting the memory card, or use a different memory card.
  • Page 175 USB cable before using the camcorder. - To be able to write back scenes and to transfer music files to the camcorder, use the com- puter’s Safely Remove Hardware function to end the connection, disconnect the USB cable, power the camcorder using the compact power adapter and only then connect it to the com- puter again.
  • Page 176 Memory card A / Memory card B writing error Attempt recovering the data? - This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing on the memory card. Select [Recover] to try to recover the recordings.
  • Page 177 Recording program: Underwater / Surface Turn on the camcorder while holding the zoom lever toward T or W to change the recording program r - Follow the instructions to switch the recording program between [Underwater] and [Surface] while the camcorder is secured inside the optional WP-V3 Waterproof Case.
  • Page 178 2 hours and 30 minutes. Reduce the number of scenes to be converted to SD. Unable to recognize the data - You transferred data to the camcorder recorded using a video configuration that is not sup- ported (PAL or SECAM). Play back the recordings with the device originally used to record them.

  • Page 179: Handling Precautions

    (0 131) and save them on a regular basis. This will protect your impor- tant recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel.
  • Page 180 Long-term storage If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C (86 °F).
  • Page 181 Regarding the use of non-Canon battery packs • For your safety, battery packs that are not genuine Canon battery packs will not be charged even if you attach them to this camcorder or to the optional CG-800 Battery Charger.
  • Page 182 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the camcorder off. Additional Information...
  • Page 183 If giving the camcorder or memory card to another person, initialize the built-in memory ( Initialization] option (0 44). Fill it up with unimportant recordings, and then initialize it again using the same option.

  • Page 184: Maintenance/Others

    Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder ( • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly.

  • Page 185: Using The Camcorder Abroad

    You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use.

  • Page 186: General Information

    WL-D89 Wireless Controller CA-570 Compact Power Adapter Memory card IFC-300PCU/S* or IFC-300PCU USB Cable * Supplied with the camcorder; not available as an optional accessory. Additional Information reader/writer ZR-1000 Zoom Remote Controller ZR-2000 Zoom Remote Controller HTC-100/S* or HTC-100 HDMI Cable...

  • Page 187: Optional Accessories

    Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any dam- age to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or...
  • Page 188 Battery pack→ Charging conditions↓ Using the camcorder Using the CG-800 Battery Charger Recording and playback times given in the following tables are approxi- mate and vary according to recording mode and charging, recording or playback conditions.
  • Page 189 Battery Recording pack mode BP-827 Using a memory card Battery Recording pack mode BP-808 BP-809 BP-819 BP-827 * Approximate times for recording with repeated operations such as start/stop, zooming, and power on/off. Recording (maximum) Viewfinder 375 min. 380 min. 230 min. 375 min.
  • Page 190 7 TL-H43 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.7. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance at full telephoto with the TL-H43 is 3.3 m (10.8 ft.).
  • Page 191 ZR-2000 or ZR-1000 Zoom Remote Controller, which is useful when operating the camcorder while it is mounted on a tripod. S f WP-V3 Waterproof Case This case allows you to record movies and take photos underwater without get- ting the camcorder wet.
  • Page 192 S g SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.

  • Page 193: Product Codes

    Product Codes Provided Accessories CA-570 Compact Power Adapter BP-808 Battery Pack WL-D89 Wireless Controller STV-250N Stereo Video Cable Optional Accessories BP-809 Battery Pack BP-819 Battery Pack BP-827 Battery Pack CG-800 Battery Charger TL-H43 Tele-converter WD-H43 Wide-converter FS-H43U II Filter Set VL-5 Video Light VFL-2 Video Flash Light WM-V1 Wireless Microphone...

  • Page 194: Specifications

    Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.2 Image compression: JPEG * This camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the camcorder’s image data at the time of shooting is used and optimized, yielding extremely high...
  • Page 195 • Lens Configuration: 11 elements in 9 groups (1 double-sided aspheric element) • AF System Autofocus (TTL + external distance sensor when set to [Instant AF]) or Manual focus • Filter Diameter: 43 mm • Minimum Focusing Distance 1 m (3.3 ft.); 40 cm (1.3 ft.) with tele macro on at full telephoto; 1 cm (0.39 in.) at full wide angle •...
  • Page 196 • Dimensions [W x H x D] (excluding the grip belt) 74 x 71 x 137 mm (2.9 x 2.8 x 5.4 in.) 74 x 71 x 131 mm (2.9 x 2.8 x 5.2 in.) • Weight (camcorder body only) 360 g (12.7 oz.) 350 g (12.3 oz.) •...
  • Page 197 About the music files The specifications of the music files compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File type: WAV The music data is saved in the memory under the following folders.

  • Page 198: Index

    ....59 3D Flip View Abroad, using the camcorder AGC (automatic gain control) limit ... .96...
  • Page 199 Recording mode Recording programs ..88 Recording time Relay recording Remote sensor Resetting all camcorder settings Reviewing recordings Saving recordings Transferring to a computer Using external ..152, 153 ..106...
  • Page 200 Underwater (recording program) Uploading movies to video sharing ....139 Web sites ..126, 129, 138 USB terminal .
  • Page 201 B) If the Equipment is defective as a result of leaking batteries, sand, dirt or water damage; C) If defects or damages are caused by the use of unauthorized parts or by service other than by Canon USA’s factory service centers or authorized service facilities;...
  • Page 202 THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE.
  • Page 203 Ship your Equipment in its original carton, box or equivalent, properly packed, fully insured with shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of the Canon Service Facilities in Canada.
  • Page 204 CANADA CANON CANADA INC. 6390 Dixie Road, Mississauga, ON L5T 1P7 ❖ If you have any questions, call the Canon Canada Information Center toll free (in Canada only) at 1-800-OK-CANON (1-800-652-2666). ❖ Si vous avez des questions, veuillez téléphoner 1-800-OK-CANON (1-800-652-2666, sans frais au Canada seulement).

This manual is also suitable for:

Vixia hfm40Vixia hfm4005116b0035117b001

Table of Contents