Canon LEGRIA HFM406 Instruction Manual page 125

Install the supplied Photo Application software following the
instructions in the software's instruction manual.
r Refer to Installing Photo Application.
First-time connection to a computer running Windows
Windows users only: The first time you connect the camcorder to the
computer, you also need to select the CameraWindow auto-launch
setting.
r Refer to Starting CameraWindow.
Connecting the Camcorder to a Computer
1 Power the camcorder using the compact power adapter.
2 Open the [Photos] index screen.
Select in advance the memory that contains the photos you want to
save.
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection D. Refer to
• Camcorder: When the connection is successfully established, [USB
Connection] appears on the screen.
4 Save the photos onto the computer.
r Refer to
IMPORTANT
• When the camcorder is connected to a computer:
- Do not open the double memory card slot cover and do not remove
the memory cards.
- Do not access, change or delete any of the camcorder's folders or
files directly from the computer as this may result in permanent data
loss. Always use only the supplied PIXELA's software to save your
movies on the computer and, if necessary, to transfer previously save
video files to a memory card connected to the computer.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
Connection Diagrams
Downloading Still Images to the Computer
(0 118).
External Connections
.
125