JVC MP-XV941DE Service Manual page 6

3.1.6 Removing LCD panel assembly(See Figure 10 and Figure 11)
• Prior to the following procedure, the keyboard assembly and
the hinge cover should be removed.
(1) Disconnect each wire from the connectors
CON9 on the main board.
(2) Remove two wires from the connector on the wireless LAN
board.
*Connect grey wire to the AUX terminal, and black wire
to the MAIN terminal for reassembly.
(3) Remove two screws F which are attached to the hinge.
(4) Remove two screws G which are attached to the hinge
from the bottom of the main unit.
(5) Pull out the hinge by moving the LCD panel unit upward.
1-6 (No.XE003)
CON2 and
CON9
CON2
F AUX Terminal
MAIN Terminal
Main board Wireless LAN board
Fig.10
G
Fig.11
F
G