5.3
Diagnosis on HDD
By operating this procedure, HDD failure is self diagnosed.
The following materials are needed. (Provision from JVC)
• USB connection floppy disc drive
• Drive Fitness Test disc
Diagnosis procedure
1. Start from USB connected floppy disc drive.
(1) Insert Drive Fitness Test disc into the floppy disc drive and connect the floppy disc drive to the PC via USB.
(2) Press the power button to turn the PC on. The PC DOS 7.0 Startup Menu will start running shortly. Input [2] and press EN-
TER key.
PC DOS 7.0 Startup Menu
Enter a choice : 2
2.Execution
(1) When [License Agreement] is displayed, input [A].
(2) When [Device List] is displayed, select [Primary Master] and input [Y].
(3) The screen returns to [Device List] confirmation display. Input [A].
1. SCSI and ATA support
2. ATA support only
License Agreement
I Agree
00
ATA
Primary Master
01
ATAPI
Secondary Master
Yes
00
ATA
Primary Master
01
ATAPI
Secondary Master
Quick Test
Advance Test
I don't Agree
Device List
****************
****************
No
Device List
****************
****************
Rescan Bus
**.** GB
Help
(No.XE003)1-13