JVC MP-XV941DE Service Manual page 9

3.1.10 Removing LCD panel assembly(See Figure 17, Figure
18)
• Prior to the following procedure, LCD panel assembly should
be removed.
(1) With a sharp pointed tool, take the cushions off. (Cushions
are fixed with adhesive tape.)
(2) Remove two screws P that are attaching the LCD panel
frame.
(3) Release the tabs on the frame by pushing the LCD panel
frame outward .
(4) Remove two screws Q from the LCD.
(5) Remove the socket wire from the connector
verter board.
3.1.11 Removing the LAN antenna(See Figure 18)
• Prior to the following procedure, LCD should be removed.
(1) Remove four screws R that are attached to the LAN anten-
nas.
(2) Remove the tape which fixes the LAN antenna if required.
Tab
LAN Antenna
CN2 on the in-
R
Q
Cushions and P
Tab
LCD LCD
Tab
Fig.17
LAN Antenna
LCD LCD
CN2
Inverter board
Fig.18
(No.XE003)1-9
Tab
R
Q