Table of Contents
Advertisement
1.5 Menu Overview
The MAIN menu, composed of nine menus, con-
tains functions which normally do not require fre-
quent adjustment in everyday operation.
Basic menu operation
1) Press the MENU key to display the MAIN
menu.
Sel Item by VRM & hit ENT.
TRAIL
MARK&
ECHO
DATA
TRAIL
GUARD
FUNC3
GUARD
ALARM
PLOT
ECHO
PLOT
SIG
SYMBOL
You can select a menu by using the cur-
sor or (in most cases) pressing appropriate
key on the control panel. To select the
PLOT menu, for example, select PLOT
and press the
press the
Cursor circumscribes current selection.
Figure 1-5 MAIN menu
MAIN
TIME
ALM
MARK
BRILL
FUNCTION
INITIAL
A/C AUTO
key or
ENTER/SELECT
key.
PLOT SYMBOL
2) Operate the VRM or EBL control to select a
menu with the cursor and press the ENTER/
SELECT key. (You can also select menus by
pressing key or control shown on the MAIN
menu. In this case you need not press the EN-
TER/SELECT key.)
For example, select the TRAIL menu.
Sel Item by VRM & hit ENT.
TIME
CONT
MODE
TRUE
AUDIO
OFF
TONE
MULT
Current setting
3) Select option (in far right-hand column) by
operating the VRM or EBL control.
4) Press the ENTER/SELECT key to register se-
lection.
5) Press the MENU key to close the menu.
Changing pages on the INITIAL menu
The initial menu has two pages: INITIAL1 and
INITIAL2. You can switch between them as fol-
lows:
Previous page: Place the cursor on [ ] and press
the ENTER/SELECT key.
Next page: Place the cursor on [ ] and press the
ENTER/SELECT key.
TRAIL
Cursor
Figure 1-6 TRAIL menu
15S
Options
30S
1M
of menu
3M
selected
6M
appear
15M
30M
here.
CONT
1 – 7
Advertisement
Table of Contents
