Wildview TGLX2IR Series Instruction Manual page 9

3. Turn t he c amera t o t he O N p osition.
4. The camera will automatically switch to external power when it is
connected, e ven i f t he i nternal b atteries a re i nstalled.
NOTE: Please make sure the voltage and polarity (+/-­‐) are correct before
connection. Incorrect voltage or polarity (+/-­‐) will damage the camera.
When both internal and external batteries are connected, the camera will
draw p ower f rom t he h igher v oltage s ource f irst.
Memory O ptions
The camera is also equipped with an expandable media card slot capable of
accepting up to 16GB* SD card (sold separately). With no memory card
inserted into the slot, the camera will use the built in SDRAM memory to
store images. If an SD card is inserted into the slot, then the camera will
bypass the built in memory and utilize the SD memory. The front counter
display will show the number of images in the built in memory, unless the
expansion card is inserted at which point the front counter will only display
the n umber o f i mages s tored i n t he e xpansion c ard.
WARNING: The above camera will not accept any High Speed memory
cards. Common verbiage that will indicate High Speed includes but is not
limited to: Extreme, Ultra, Optima, Micro, Platinum, Store and Shoot.
www.wildviewcam.com
Toll F ree 8 88-­‐304-­‐6125
9