Table of Contents
Advertisement
Available languages
Available languages
_
WARNING:SAVE THESE INSTRUCTmONS.
To
reduce the risksoffireor expbsion, e Uectric shock,
andtheinjury to persons, readandunderstand a H
instructions i ncluded inthis manualBefamiUiar with
the controUs andtheproperusage ofthe equipment.
READ ALL mNSTRUCTmONS
KNOW YOUR POWER TOOL.
Read the operator's
manuaU carefully. Learn the machine's appUications and
Uimitations as well as the specific potentiaUhazards reUated
to this tooL
WAF{NING:
To reduce the risk of fire or expbsion:
Do not spray fiammabUe or combustibUe matedaUs
near an open flame or sources
of ignition such as
cigarettes,
motors, and electrical
equipment.
For units intended
for use with only water-based
or
mineral spirit-type
materials
with a minimum
flash
point of 140°F (60°C), do not spray or clean with
liquids having a flash point less than 140°F (60°C).
Paint or solvent flowing through
the equipment
is
able to result in static electricity.
Static electricity
creates a risk of fire or explosion
in the presence of
paint or solvent fumes.
Do not use a paint or a solvent containing
haloge-
nated hydrocarbons.
Keep spray area well ventilated.
Keep a good supply
of fresh air moving through the area. Keep pump
assembly
in a welPventilated
area.
Do not smoke in the spray area.
Do not operate light switches,
engines, or similar
spark-producing
products
in the spray area.
Keep area clean and free of paint or solvent contain-
ers, rags, and other flammable
materials.
Know the contents
of the paints and solvents
being
sprayed.
Read all Material Safety Data Sheets
(MSDS) and container
labels provided
with the
paints and solvents.
Follow the paint and solvent
manufacturer's
safety instructions.
Fire extinguisher
equipment
shall be present and
working.
WARNING:
To reduce the risk of skin injection:
Do not aim the nozzle at, or spray any person or
animal.
Keep hands and other body parts away from the
discharge.
For example,
do not try to stop leaks
with any part of the body.
Always use the spray tip. Do not spray without
spray
tip in place.
Only use a spray tip specified
by the manufacturer.
Use caution when cleaning and changing
spray tips.
in the case where the spray tip clogs while spraying,
follow the manufacturer's
instructions
for turning
off
the unit before removing the spray tip to clean.
Do not leave the unit energized
while unattended.
When the unit is not in use, turn off the unit in
accordance
with the manufacturer's
instructions.
High pressure spray is able to inject toxins into the
body and cause serious bodily injury. In the event
that injection occurs, seek medical attention
imme-
diately.
Check parts for signs of damage.
Replace any dam-
aged parts.
This system is capable
of producing
2500 psi. Only
use replacement
parts or accessories
that are speci-
fied by the manufacturer
and that are rated a mini-
mum of 2500 psi.
Know how to stop the unit quickly. Be thoroughly
familiar with the controls.
Verify that all connections
are secure before operat-
ing this unit.
For household
use only.
WARNING:
To reduce the risk of injury:
Do not operate or spray near children.
Keep children
away from equipment
at all times.
Do not overreach
or stand on an unstable support.
Keep effective
footing and balance at all times.
Stay alert and watch what you are doing.
Do not operate the unit when fatigued
or under the
influence of drugs or alcohol.
3 - English
Advertisement
Table of Contents
