Using Your Refrigerator; Setting The Controls; Freezer Section - Kenmore 795.7032 series Use & Care Manual

SETTING THE CONTROLS
AIRFLOW
The refrigerator
entire appliance
colder the settim
keep the temper
the cold air flow
Setting the freez
more cold air in
colder.
Cold air circular,
section and bacl
dividing the two
packing your ref
and may cause 1
too warm or cac
diagram below.
Temperature
:ontrot functions as the thermostat for the
(refrigerator and freezer sections). The
;j, the longer the compressor will run to
_ture colder. The freezer control adjusts
from the freezer to the refrigerator.
er control to a lower temperature keeps
the freezer compartment to make it
._sfrom the freezer to the fresh food
: again through air vents in the walt
sections. Be sure not to block vents while
rigeratoro Doing so will restrict airflow
he refrigerator temperature to become
se interior moisture buildup. (See air flow
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you woutd like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Dispenser
Press the Ice/Water
Select button to select
eitherWater, Cubed
Ice or Crushed Ice. The
selected option
will
illuminate.
Some dripping may
occur after dispensing.
Hold your cup beneath
the dispenser for a few seconds after dispensing to
catch all of the drops.
NOTE: The dispenser will not work if any door is left oper
or if the control lock is engaged.
CAUTION: The control display is operated by
touch. Excessive moisture on the display may cause a
malfunction. Please keep the display clean and dry.
Ultra ice
When you press the ice button, the Ultra ice graphic
will illuminate in the display and will continue for 24
hours. The function will automatically shut off after 24
hours.
You can stop this function manually by touching the
button one more time.
This function increases both ice making and freezing
capabilities.
Water Filter Reset
CHANGE WATER FILTER
When the water filter indicator turns on, you have to
change the water fitter. After changing the water filter,
press and hold the Water Filter Reset button for three
seconds to turn the indicator light off:. You need to chang_
the water filter approximately every six months.
The Refrigerator Temp Control ranges from 33°F to
46°F (0°C to 8°C). Press the refrigerator temp button
to cycle through the available temperature settings one
increment at a time.
The Freezer Temp Control range is from =6°F to 8°F
(=21°C to =13°C). Press the freezer temp button to
cycle through the available temperature settings one
increment at a time.
18