Kenmore 795.7032 series Use & Care Manual page 16

HOW TO REPLACE THE FREEZER DRAWER
With both hands, putt out the center bar until the rait
is fully extended.
Hook the door support into the rail tabs on both sides.
NOTE: Make sure that the left and right rail covers are
attached to the correct rails. See picture below.
Right Rail
Cover
Left Rait
Cover
Lower the drawer into its final position and tighten the
screws Q.
With the drawer pulled out to futl extension, insert the
lower basket (_) in the rail assembly.
Align the tabs on the covers with the assembly holes
on each rail and snap the rail covers in place to
secure.
Assembly Hole
_,WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to touch or go
near the freezer drawer.
_ILWARNING: DO NOT step or sit down on freezer
drawer.
16