Kenmore 790.3690 Series Use & Care Manual page 14

Setting Oven Controls (con't)
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER and FLEX CLEAN pads control the Continuous Bake or 12 Hour Energy Saving features. The
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes• The oven can be programmed to override this feature for Continuous Baking•
iNSTRUCTiONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
"12h" or "=-h" will _'p_ar in the display and the control will beep
once•
2. Press j to swttch between the 12 Hour Energy Savtng and
continu65_ bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode and
"==h" indicates the control is set for the Continuous Bake feature
(Figure 3).
3.
Press
('STA_RT ")to accept the change (Figure 4; display will return to time
of day) or press ('STmOP ")to reject the change.
PRESS DISPLAY
To r 7
se_6n(]s
Figure 1
Figure 2
Figure 3
Setting Minute Timer
Figure
4
The TIMER pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that
will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during
any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS PRESS DISPLAY
To set the Minute Timer (example for 5 minutes)
•
2.
•
..... ==.==will appear and "TIMER" will flash in the display
Press the number pads to set the desired time in the display
_). Press S_TA_RT_. The time will begin to count down with
(example
"5:00" and "TIMER" will stay in the display (Figure 6). Note: If is
not pressed the timer will return to the time of day after 25 sec6-_ds.
When the set time has run out, "End" and "TIMER" will show in
The clock will sound with 3 beeps every 5
is pressed.
To cancel the Minute Timer before the set time has run out
Press The display will return to the time of day.
Figure 5
Figure 6
Figure 7
To Set Add 1 Minute Feature
pad is pressed, 1 minute is The _i te ADD 1 MINUTE pad is used to set the Add 1 Minute feature• When the
added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the _i:_ te
pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute•
14