Removing, Reversing And Replacing - Kenmore 795.6500 Series Use & Care Manual

For drawer type models
REMOVING, REVERSING AND REPLACING
REFRIGERATOR DOORS
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat tip screwdriver, 10mm
open-end wrench, flat 2-inch putty knife.
IMPORTANT: Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECTION
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
• Remove the top hinge cover (1).
• Remove the 3 screws and lift off the top hinge (2).
• Lift the Refrigerator door (3) slightly and remove it.
• Use a flat tip screwdriver to pry off top hole cover (4)
and attach it on the right.
• Loosen the screw (5), remove the stoppers (6), and
attach them on the left (on the opposite side).
• Loosen the pin (8) and remove it.
• Loosen the 2 screws (9) and the 2 screws (10), and
lift off the middle hinge (11).
• Use a flat tip screwdriver to pry off bottom hole cover
(7) and attach it on the right.