Furuno GD-3300 Operator's Manual page 95

Setting GPS smoothing
The default GPS smoothing settings are suitable for most all condi-
tions. If change of the default settings is necessary, do the following
1. Press [MENU] and [8], and then press [ ] to set the cursor on
PAGE CHANGE (TO GPS INITIAL SETTINGS). The follow-
ing display appears.
GPS INITIAL SETTINGS
PAGE CHANGE (TO INITIAL SETTINGS)
POSITION FIXING MODE = 2D
GEODETIC DATUM
HDOP THRESHOLD
TIME DIFFERENCE
LATITUDE
LONGITUDE
DELTA LATITUDE
DELTA LONGITUDE
SMOOTHING
ANTENNA HEIGHT
COLD START
CST SATELLITE NO.
MIN. ELEVATION ANGLE = 05 (5~9)
DESELECT SAT NO.
Figure 10-6 GPS INITIAL SETTINGS menu
2. Set the cursor on SMOOTHING.
3. Enter latitude and longitude smoothing time from 0 - 99 minutes
in two digits.
4. Enter speed and course smoothing time from 0 - 99 seconds in
two digits.
5. Press the [ENT] key.
3D
= WGS-84 WGS-72 TOKYO
EURO AUST MISC
= 20 (2~99)
= 09:00
= 34 00. 000 N
= 135 00. 000 E
= 00. 000 N
= 00. 000 E
= 00~00 L/L-SPEED (0~99)
= 030 M
= NO YES
= 01
= — —
2D/3D
NAD
(007)
10-7