Furuno GD-3300 Operator's Manual page 85

3-1 SAVE TRACK
00 CREATE NEW FILE
01
02
03
06
07
Data input
cursor
SELECT FILE TO BE SAVED USING
ENTER FILE NAME BY USING TRACKBALL.
SET CURSOR ON OK BY USING TRACKBALL.
PRESS ENT TO SAVE.
Figure 9-4 SAVE TRACK display
5. The red cursor should be on 00. This will save data to a new file.
You may save data to an existing file name, in which case all
previous data on that file will be deleted.
6. Assign a file name. The file name may contain 32 alphanumeric
characters. You can switch between upper and lower case letters
by operating the [ZOOM IN], [ZOOM OUT] keys.
ZOOM
OUT
Figure 9-5 How to select upper and lower case letters
TOTAL NO. OF FILES = 0
(These are lower case characters.)
DATE CREATED POINTS
.
ZOOM
IN
9-3