Furuno GD-3300 Operator's Manual page 62

Creating routes with waypoint numbers: MENU
key
1. Press the [MENU] key.
2. Press the [2] key to display the ROUTE list.
2 ROUTE
WAYPOINT LATITUDE LONGITUDE
1 (2 8) 3 4 4 5.1 4 6' N 1 3 5 2 1.2 1 7 E
2 ( ) . ' N
3 ( ) . ' N
Figure 5-3 ROUTE list
3. Press [ ] twice.
4. Enter first waypoint number of route in two digits. If it is 08, for
example, press [0] and [8]. The L/L position of the waypoint ap-
pears.
5. Press [ ] followed by [ ] twice to send the data input cursor to
the next line. Enter waypoint number. Its L/L position appears.
6. Repeat step 6 to enter another waypoint.
7. To enter another route, press the [ ] key to scroll page.
8. After entering all information, press the [ENT] key.
Creating routes with waypoint numbers: ROUTE
key
1. Press the [ROUTE] key to display the ROUTE NO. menu.
ROUTE NO.
MODE = CURSOR WAYPOINT
ROUTE NO. =
WPT NO. = 0 0 +
+
ENTER ROUTE NO., AND WAYPOINT NO.
PRESS ENT TO REGISTER.
Figure 5-4 ROUTE NO. menu
2. Select WAYPOINT from the MODE field.
3. Select ROUTE NO.
4. Enter route number in two digits. If the route number is 01, for
example, press [0] and [1].
1
ROUTE NO
DISTANCE
.
. ' E .
. ' E .
??? LIST
+ + + +
+ + + + +
TTG
NM . H
NM . H
NM . H
+ +
+ +
5-3