Kenmore 2002 Use & Care Manual page 9

7. Select LOAD SiZE
Small
Extra
Small
Large
Extra
Large
LOAD SiZE
9.
Select options (on some models)
One
Rinse
2nd One Rinse
Rinse with Fabric Softener
RINSE
2nd Rinse
with Fabric Softener
Select the load size setting most suitable for your load. Extra
Small will add a low amount of water for smaller loads and
Extra Large will add the most amount of water for large or bulky
loads. Items need to move freely.
Select the desired cycle options. If you are using Fabric Softener,
be sure to select one of the Rinse with Fabric Softener options.
8. Select WASH TEMP
Cool Warm
Cold Hot
WASH TEMP
After selecting the load size, select the Wash Temp by turning
knob to desired temperature. Ail rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Hot
Some cold water is added to save
energy. This will be cooler than
Whites and pastels
Durable garments
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water may be added to Colors that bleed
assist in soil removal and to help or fade
dissolve detergents. Light soils
Cold
This is the temperature from your Dark colors that
faucet. If your tap cold water is bleed or fade
very cold, warm water may be Light soils
added to assist in soil removal and
help dissolve detergent.
I0. Press START/PAUSE/Unlock Lid
to begin wash cycle
CANCEL
Hold 3 Sec,
START
PAUSE
Unlock Lid
Press the START/PAUSE/Unlock Lid button to start the wash cycle.
When the cycle has finished, the CYCLE COMPLETE status light
will light. Promptly remove garments after cycle has completed to
avoid odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lld to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
PAUSE/Unlock Lid again to restart the cycle.
If lid is left open for more than 10 minutes, the water wJJJ
pump out automatically.