Cleaning; Maintenance & Service - Meridian DSP5500 User Manual

Hide thumbs Also See for DSP5500:
Table of Contents

Advertisement

Cleaning

Maintenance & service
FCC WARNING: This equipment generates and can radiate radio fre-
quency energy, and if not installed and used correctly in accordance with
our instructions may interfere with radio communications or radio and
television reception. It has been type-tested, and complies with the limits
set out in Subpart J, Part 15 of FCC rules for a Class B computing device.
These limits are intended to provide reasonable protection against such
interference in home installations.
If this equipment does interfere with or suffer interference from radio or
television reception, then the following measures should be tried:
1. Reorient the receiving aerial (or antenna), or route the antenna cable
of the receiver as far away as possible from the DSP5500 and its
cabling
2. Ensure that the receiver uses well-screened antenna cable
3. Relocate the receiver with respect to the DSP5500
4. Connect the receiver and this product to different AC outlets
5. If the problem persists, contact your dealer
EEC This product has been designed to comply with the limits set out in
EN55013 and EN55020C.
REMEMBER to switch all units off before changing any connections.
The cabinet of the DSP5500 is finished with veneer.
The display panel and top are glass, and should be cleaned using a barely
damp chamois leather.
Do not use abrasive cleaners on any part of the DSP5500.
The phono connectors on the rear of the DSP5500 are gold-plated, and
need no cleaning if gold-plated phono plugs are used. Otherwise, we
recommend that you remove and replace each plug at least once a year.
A proprietary contact cleaner can be used to some advantage.
The Meridian DSP5500 has been carefully designed to give years of
untroubled service. There are no user-serviceable parts inside the case,
nor do the units require any form of maintenance.
In the unlikely event that your DSP5500 fails to function correctly, it
should be returned, in its original packing, to your Meridian dealer. In case
of difficulty, please write to the following address if you live in the UK:
Digital Gramophone & Wireless Ltd
Stonehill, Stukeley Meadows, Huntingdon, Cambridgeshire PE18 6ED
Outside the UK, contact the importing agent for the territory. A list of
Meridian agents abroad is available from the above address.
No responsibility can be accepted for the DSP5500 while it is in transit to
the factory or an agent, and customers are therefore advised to insure the
unit.
In the USA, contact
Meridian America Inc.
3800 Camp Creek Parkway, Building 2400 Suite 112, Atlanta GA 30331
Tel (404) 344-7111 Fax (404) 346-7111
Help
52
DSP5500 User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents