Unpacking Your Speakers; Removing The Grilles; Cleaning The Speakers - Meridian 3100 Installation And User Manual

Unpacking your speakers

Before you begin installation you should ensure that your Active loudspeakers are
the correct voltage for your local AC supply. If they are not, do not try to install
them, and contact your dealer.
You should not make any connections to the Active loudspeakers, or to any other
component in your system, while the AC power supply is connected and switched on.
Components
Each Active loudspeaker system is supplied with the following components:
• One power cord per speaker.
• Meridian analogue audio lead.
• Pack of four feet/spikes.
If any of these items is missing please contact your dealer. We suggest that you
retain the packaging carefully for maximum protection in transit.

Removing the grilles

M3100: The grille is held tightly in place by the side metal plates. Gently pull it from
the top edge, taking care not to scratch the high-gloss lacquer, then pull it gently
from the sides and then bottom to remove it.
M3100HC: The grille is held on by pegs. Gently pull from the sides and then top and
bottom to remove it.
Note: The speakers are designed to be used with their grilles fi tted.

Cleaning the speakers

Greasy marks should be removed from the metal surfaces by light rubbing with a
slightly damp cloth and a trace of proprietary glass cleaner. Do not use any other
solvent or abrasive based cleaners.
On black speakers, small marks on the lacquer surface can usually be removed by
treating with Black Turtle Wax Color Magic. Do not use any coarse polish such as
Auto Colour restorer, and always test any polish on a non-visible area fi rst. Do not
use any polish containing a solvent; these can cause crazing of the surface.