Type 5 Setup, Meridian 500 System Not Using 562; Type 6 Meridian Digital Theatre; Type 7 Second Room In Multiroom System; Type 8 Additional Room In Multiroom System - Meridian DSP5500 User Manual

Appendix 2 Test mode

Type 5 setup, Meridian 500 system not using 562

The CD is connected directly to D1, all other sources are routed directly or
via an A/D converter to D2. Type 5 sets the DSP5500 as a left master, so
you will need to make the other a right slave, or adjust left/right on both
speakers.
Type 5
Remote key Logo
CD cd
Radio rd
LP LP
Video tn
Tape 1 t1
Tape 2 t2
CDR Cr
Cable Cb
Text tt
VCR1 U1
VCR2 U2
LaserDisc Ld

Type 6 Meridian Digital Theatre

Type 6 has inputs like Type 1. The main differences selected in Type 6
are:
Balance control set to 'no'
Centre-channel choice set 'yes'

Type 7 Second room in Multiroom system

Type 7 has inputs like Type 1. In Type 7 the volume option is set to 2.

Type 8 Additional room in Multiroom system

Type 8 has inputs like Type 1. In Type 8 the volume option is set to 3.
Test mode is not recommended for everyday use. As its name suggests,
however, it is very useful for testing the installation and the speakers.
The main advantages of Test mode are that you can directly display
which of the DSP5500's physical inputs has been selected, and that
entering or leaving this mode does not change any of the programming
you may have done previously.
1. Switch on the power supply to the master speaker only while
continuously pressing the Next key on the MSR. The speaker will
display
1L 65
and the red light will be on.
500
Input on Control?
DSP5500
D1 1C
D2 2C
D2 NC
D2 NC
D2 NC
D2 NC
D2 1C
D2 NC
D2 NC
D2 NC
D2 NC
D2 5C
Appendix 57
500, 506, 508
Address
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
DSP5500 User Guide