Cursor And Data Display - Furuno GP-1850WD Operator's Manual

11. USING C-MAP NT MODEL

11.2 Cursor and Data Display

Besides its fundamental functions of
providing position data, the cursor can also
show caution area, depth area, source of
data, etc. Further, you can display
information about an icon by placing the
cursor on it.
1. Press the cursor pad to turn the cursor
on.
34 12.345' N FROM
135 12.345' E OS
DGPS 3D
Plotter display
2. Use the cursor pad to place the cursor on
the position desired.
3. Press the [ENTER] key to open the
Objects window. For example the
following window appears.
Objects
Caution area
Depth area
PUNTA CORNACCHIA
Source of data
ACCO AMENO
ISCHIA PORTO
DGPS 3D
Objects window
4. Press ▲ or ▼ to select the item desired.
11-2
NORTH
16.45nm
UP
276.9
ZOOM
IN
ZOOM
OUT
COURSE
UP
GO TO
CURSOR
CENTER
PORT
SERVICE
ENTER
CANCEL
5. Press the ENTER soft key or the
[ENTER] key to display details for object
selected Objects.
Caution area
Information
LEUCHTFEUER DIE KARTE ENTHAEL
T NUR DIE LAGEN DER WICHTIGEN
FEUER. LIGHTS ONLY THE PRINC
IPAL LIGHTS ARE SHOWN ON THIS
CHART. MISSWEISUNG SIEHE K
ARTEN GROESSEREN MASSSTABS. M
AGNETIC VARIATION LOCAL MAGNE
TIC ANOMALIES SEE LARGER SCAL
E CHARTS.
Example of caution area window
6. Press the CANCEL soft key to close the
window.
7. Repeat steps 4 to 6 to select other item.
8. Press the CANCEL soft key to close the
Objects window.
When you place the cursor on any icon, its
information appears.
1. Place the cursor on a lighthouse icon.
Place the cursor
on a lighthouse icon.
NAVAID : X X X X X X 6S 7m 9M
FROM OS 2. 43nm
DGPS 3D
Lighthouse icon
2. Press the [ENTER] key. For example, the
following window appears.
NORTH
UP
351. 2
ZOOM
IN
ZOOM
OUT
COURSE
UP
GO TO
CURSOR
CENTER