Inserting Mini Chart Card; Turning The Power On/Off - Furuno GP-1850WD Operator's Manual

1.3 Inserting Mini Chart
Card
Insert appropriate mini chart card before
turning on the power.
Note: Static electricity can be passed
through your fingers to a memory card
and destroy the contents of the card.
To prevent this, always touch a
metallic object, such as a steel desk,
before handling a memory card.
1. Push down the lid catch to open the mini
chart card slot cover.
Location of mini chart
card slot cover
2. Insert appropriate mini chart card groove
side up.
Inserting groove
side up.
Mini chart card
Direction of mini chart card
3. Close the slot cover to protect the chart
drive. (Keep the slot cover closed at all
times.)
Note: Turn off power before inserting or
ejecting the mini chart card.
Card slot
1. OPERATIONAL OVERVIEW
1.4 Turning the Power
On/Off
Turning the power on
Press the [POWER/BRILL] key at bottom
left-hand side of the display unit to turn on
the power. When the unit is turned on, it
proceeds in the sequence shown in the
figure in below, after displaying the FURUNO
information display.
Displayed for about five seconds.
START UP TEST
PROGRAM
RAM
BACKUP DATA
INTERNAL BATTERY
GPS
- - WARNING - -
NO NATIONAL HYDROGRAPHIC OFFICE
HAS VERIFIED THE INFORMATION
IN THIS COASTLINE DATA CARD AND
NONE ACCEPT LIABILITY FOR THE
ACCURACY OF REPRODUCTION OR ANY
MODIFICATIONS MADE THEREAFTER.
THIS PRODUCT WITH THIS COASTLINE
DATA CARD DOES NOT REPLACE THE
REQUIREMENT TO USE THE
APPROPRIATE PRODUCTS FOR
NAVIGATION ACCORDING TO NATIONAL
AND INTERNATIONAL REGULATONS.
FURUNO ELECTRIC CO., LTD.
Displayed for about 30 seconds,
or press any key to escape.
The last-used display appears.
Start-up sequence
For any NG on the start up test display,
request service.
The GP-1850WD/1850W takes about 90
seconds to find its position when turned on
for the very first time. This is because the
equipment has no satellite data, called the
Almanac, in its database. If you want to
lessen the time needed to find position you
may enter your position manually (default
position: San Francisco, USA) on the GPS
SETUP OPTIONS menu.
Thereafter it takes about 12 seconds to find
position each time the power is turned on.
OK
OK
OK
OK
OK
1-3