Table of Contents
Advertisement
3 Installation
Remove carefully the board from the shipping box and check for any damages.
Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB
and external power supply. Select the correct Voltage supply:
ADA-16FX-ETHERNET is designed for 5V power supply.
Jumper
JP10 (5V/3V3)
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to
face to the outer edge.
Ethernet jack
Note:
Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET.
UG-960011-10
ADA-16FX-ETHERNET
Chapter 3 Installation
Setting
Description
1-2
VCC is set to 5V (ADA-16FX-ETHERNET)
2-3
VCC is set to 3.3V
- 6 -
© Fujitsu Microelectronics Europe GmbH
Advertisement
Table of Contents
