Table of Contents
Advertisement
2 Overview
2.1 Abstract
The ADA-16FX-ETHERNET is an adapter board that can be used together with the
evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET
extends the evaluation board with Ethernet connectivity. It can be used for software
development and testing.
The board allows the designer immediately to start with the software development before a
final target system is available.
2.2 Features of adapter board
< 10BaseT Ethernet connectivity
< Software example including openTCP stack is available
< Multiplexed bus interface
< Selectable chip select via Jumper
< Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board
(Note: SK-16FX-EUROSCOPE has to be ordered separately)
2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)
< 1x UART-Transceiver (SUB-D9 connector)
< 1x USB to serial converter (Type-B connector)
< 1x High-speed CAN-Transceiver (SUB-D9 connector)
< 2x LED-Display (7-Segment)
< 2x User-button
< 1x Reset-button, Reset-LED
< All 100 pins routed to pin-header
< On-board 5V and 3V voltage regulators, Power-LED
< USB power-supply (external power supply possible)
This board must only be used for test applications
in an evaluation laboratory environment.
© Fujitsu Microelectronics Europe GmbH
ADA-16FX-ETHERNET
Chapter 2 Overview
ADA-16FX-ETHERNET
- 5 -
UG-960011-10
Advertisement
Table of Contents
