Lcd Screen; Using The Lcd Screen; Power Saving Function; Adjusting The Angle Of The Lcd Screen - Epson Stylus Photo RX685 Series Operation Manual

LCD screen

Note:
The LCD screen may contain a few small bright or dark spots, and because of its features it may have
an uneven brightness. These are normal and do not indicate that it is damaged in any way.

Using the LCD screen

Follow the instructions below to select and change the setting menus and the photos on the
LCD screen.

Power saving function

If no buttons are pressed for more than 3 minutes, the printer becomes inactive or a slide show
begins if Screen Saver Settings is set to Memory Card Data.
After 13 minutes of inactivity, the screen turns black to save energy and the Mode lights turn
on and off in a clockwise motion.
Press any button (except P On) to return the screen to its previous state.

Adjusting the angle of the LCD screen

You can change the angle of the LCD screen.
a
b
b,d,e
c
d
a Use Copies + or - to set the number of copies
for the selected photo.
b Press l or r to select the setting item.
c
c Press u or d to select the menu item. The
highlighted part moves up or down.
a
d Press r to open the setting item list. Press u
or d to select the setting item and then press
OK.
e
e Press l or r to change the displayed photo on
the LCD screen.
a
c,d
Control Panel Functions
5