Yamaha DSP-E492 Owner's Manual page 14

2 When connecting with your existing integrated amplifier or receiver
which cannot receive signals with the Dolby Digital (AC-3) decoded
(This diagram shows this unit is connected with the Yamaha DSP-A2070 which is equipped with the digital sound field
processor, the Dolby Pro Logic Surround Decoder and seven-speaker driving amplifiers.)
Front effect speaker
Left
AUDIO OUT
VIDEO OUT
RF demodulator
(YAMAHA APD-1 etc.)
Dolby Digital (AC-3) Decoder
6CH DISCRETE
INPUT
VIDEO SIGNAL
AUDIO SIGNAL
Notes
For the connections to this unit's 6CH DISCRETE INPUT
terminals, refer to page 11.
For the connections of rear speakers and subwoofer(s) to
this unit, refer to page 12 – 13.
14
Main speaker
Left
LD player etc.
AC-3 RF OUT
AC-3 RF IN
MAIN CENTER REAR MAIN CENTER REAR
INPUT
from
AMP/RECEIVER
PREOUT
SUB
SUB
WOOFER (SURROUND) WOOFER (SURROUND)
MONITOR
IN
OUT DVD/LD TV/DBS VCR
TAPE REC
1 2 3 4 IN
PB OUT
VCR
CD TUNER TAPE DVD/LD TV/DBS
(LINE 1) (LINE 2) ( MD )
INPUT
Center speaker
Amplifier or
receiver
MAIN
CENTER SINGLE:4 MIN./SPEAKER
DUAL:2 MIN./SPEAKER
REAR 6 MIN./SPEAKER
CENTER SINGLE:8 MIN./SPEAKER
DUAL:4 MIN./SPEAKER
8 MIN./SPEAKER
REAR
IMPEDANCE SELECTOR
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
REAR
OUT
CENTER
DUAL DUAL
OUT
SINGLE
OUTPUT SPEAKERS
Right
Rear speakers
If you select this connecting way, the PROCESSOR
SELECTOR switch on the front panel must be normally set
to the "EXTERNAL" position. When you will play a source
on the LD player etc. (connected to this unit) with the Dolby
Digital (AC-3) decoded, set the PROCESSOR SELECTOR
switch to the "INTERNAL" position.
Main speaker
Right
Audio/Video equipment
(Europe model)
SUB
REAR CENTER WOOFER
l0 dB 0 dB
(SURROUND) DUAL DUAL I00W MAX.
SWITCHED
MAIN
OUTPUT
LEVEL AC OUTLET
Left
Front effect speaker
Right
To AC
MAINS
outlet
Subwoofer
System