Yamaha DSP-E492 Owner's Manual page 10

EXAMPLES OF BASIC CONNECTIONS
Never plug in this unit and other components until all connections are completed.
Note
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this unit.
* If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making sure
to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
1 When this unit is used as a main controller
Monitor TV
See page 11.
MAIN
6CH DISCRETE
INPUT
VIDEO SIGNAL
AUDIO SIGNAL
1
CD
(LINE 1)
CD player
Notes
If you select this connecting way, the PROCESSOR
SELECTOR switch on the front panel of this unit must be
set to the "INTERNAL" position.
For speaker connections, see page 12 – 13.
10
LD player etc.
CENTER REAR MAIN CENTER
INPUT
from
AMP/RECEIVER
PREOUT
SUB SUB
WOOFER (SURROUND) WOOFER
MONITOR
IN
OUT DVD/LD TV/DBS
TAPE REC
2 3 4
IN
PB OUT
TUNER TAPE DVD/LD TV/DBS
(LINE 2) ( MD )
INPUT
Tuner
Amplifier
(for driving main speakers)
MAIN
REAR
(SURROUND)
OUT
VCR
OUT
VCR
OUTPUT OUTPUT
TV/Satellite tuner
Tape deck,
MD recorder, etc.
Main speakers
Left
(Europe model)
MAINS
l0 dB 0 dB
I00W MAX.
MAIN SWITCHED
LEVEL AC OUTLET
Video cassette recorder
Right
To AC outlet