Summary Of Audible Notification - Honeywell ADEMCO LYNXR-I Security System User Manual

Hide thumbs Also See for ADEMCO LYNXR-I Security System:
Table of Contents

Advertisement

*UPPER CASE indicates announcements after pressing STATUS once. Lower case indicates announcements after
pressing STATUS twice.
SOUND
CAUSE
INTERRUPTED
FIRE ALARM
Speaker and
external piezo and
bell
CONTINUOUS
BURGLARY/AUDIBLE
Speaker and
EMERGENCY ALARM
external piezo and
bell
ONE SHORT BEEP
a. SYSTEM DISARM
(not repeated)
b. SYSTEM ARMING
Speaker and
ATTEMPT WITH AN
external piezo
OPEN ZONE.
c. BYPASS VERIFY
ONE SHORT BEEP
a. SYSTEM IS IN TEST
(once every 45
MODE
secs) Speaker and
b. LOW BATTERY AT A
external piezo
TRANSMITTER
c. SYSTEM LOW
BATTERY
d. FAIL TO
COMMUNICATE
TWO SHORT
ARM AWAY OR MAXIMUM
BEEPS
Speaker and ext.
piezo
THREE SHORT
a. ARM STAY OR INSTANT
BEEPS
Speaker and
b. ZONE OPENED WHILE
external piezo
SYSTEM IS IN CHIME
MODE.
RAPID BEEPING
a. TROUBLE
Speaker and
external piezo
b. MEMORY OF ALARM
SLOW BEEPING
a. ENTRY DELAY
Speaker and
WARNING
external piezo
b. EXIT DELAY WARNING

Summary Of Audible Notification

Summary Of Audible Notification
Summary Of Audible Notification
Summary Of Audible Notification
DISPLAY
FIRE ALARM is displayed; zone
number in alarm displayed.
ALARM is displayed; zone number
in alarm displayed.
a. Green LED on steady
b. The number of the open protection
c. Numbers of the bypassed
a. Opened zone identifications will
b. LOW BAT displayed with zone
c. LOW BAT displayed with no zone
d. FC displayed with no zone no.
AWAY or AWAY + INSTANT is
displayed. Red ARMED indicator is
lit.
a. STAY or STAY + INSTANT is
b. CHIME displayed, number of open
a. FAULT displayed. Number of
b. FIRE ALARM or ALARM is
a. Exceeding the delay time without
b. AWAY or AWAY + INSTANT is
zone is displayed after pressing
STATUS.
protection zones are displayed
(One beep is heard for each zone
displayed).
appear.
number of transmitter.
no.
displayed. Red ARMED indicator is
lit.
protection zone will be displayed if
the Status key is pressed.
troubled protection zone is
displayed.
displayed; zone number in alarm is
displayed.
disarming causes alarm.
displayed
– 47 –
ANNOUNCEMENT*
fire alarm + zone voice
descriptor
(Voice descriptor is
interlaced with the siren and
sounds every 45 seconds)
alarm + zone voice
descriptor
(Voice descriptor is
interlaced with the siren and
sounds every 45 seconds)
a. DISARMED–READY TO
ARM
b. DISARMED–NOT READY
TO ARM
c. zones bypassed
a. No announcement
b. low battery + zone voice
descriptor
c. system low battery
d. check system
ARMED AWAY [INSTANT] –
EXIT NOW
a. ARMED STAY [INSTANT]
– EXIT NOW
b. zone voice descriptor
a. fault + zone voice
descriptor
b. fire alarm or alarm + zone
voice descriptor
a. DISARM SYSTEM NOW
b. ARMED [AWAY]
[INSTANT] – EXIT NOW

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ademco lynxr-en

Table of Contents