Quick View Of System Functions - Honeywell ADEMCO LYNXR-I Security System User Manual

QUICK VIEW OF SYSTEM FUNCTIONS

QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
NOTE:
SECURITY FUNCTIONS
Checking system status: ---------------
To arm in STAY mode: ----------------
To restart exit delay: -------------------
To arm in AWAY mode: ---------------
To arm with NO DELAY: -------------
To arm if Quick Arm is active: -----
To disarm system and silence alarms:
To bypass a zone(s): ---------------------
To turn Chime mode on or off: -----
* Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or AWAY key.
MESSAGE CENTER
To record a message: -------------------
To stop recording before end of 85 secs:
To play back a message: ---------------
---------------------------- [✻]
To skip a message:
To delete all messages:
VOLUME ADJUSTMENT
To adjust message playback/announcement volume:
To mute system announcements: -
To restore/unmute announcements:
SPEAKER PHONE OPERATION
To enter speaker phone mode: -----
To exit speaker phone mode: -------
To enable/disable (toggle) ringer:
To return keypad to telephone mode
To flash (switch between two calls using call waiting):
*To return to first call wait at least two (2) seconds and enter AUX again.
= Boxes represent the entering of your 4-digit user code.
STATUS
AWAY or STAY (hold down for at least 2 seconds)
FUNCTION + CHIME
FUNCTION + RECORD
FUNCTION + PLAY
-------------------- FUNCTION + DELETE
FUNCTION + VOLUME + OFF
FUNCTION + VOLUME + [3] or [6]
[#] + AUX
OFF
[#] + VOLUME + AUX
(after clearing an alarm or trouble or disarming the system):
* + STAY
* + STAY OR STAY (only if programmed and
* + AWAY
* + AWAY or STAY + NO DELAY
+ OFF
+ BYPASS + 2-digit zone number(s)
OFF
(during message replay)
FUNCTION + VOLUME + [3] or [6]
*
AUX
– 9 –
system armed in Stay mode)
[#] + AUX