Installer System Test; Z-Wave Enrollment - Honeywell TH8320ZW1000 Installation Manual

Installation Guide

Installer system test

During installer setup, press t
repeatedly until "Test" appears.
0120
DONE
Press DONE to terminate testing.
System test
1 Cooling system
2 Fan system
3 Heating system
4 Emergency
heating system
CAUTION: EQUIPMENT DAMAGE HAZARD. Compressor protection is bypassed
during testing. To prevent equipment damage, avoid cycling the compressor quickly.

Z-Wave enrollment

1. To join a Z-Wave
network, set the
Z-Wave controller
to INCLUDE mode.
2. Select 1 to add
thermostat to
Z-Wave network.
69-2486—03
20
System status
0 Compressor and fan turn off
1 Compressor and fan turn on
2 Second stage compressor turns on
0 Fan turns off
1 Fan turns on
0 Heat and fan turn off
1 Heat turns on (fan on if Function 0170 is set for heat pump,
or if Function 0180 is set to "1")
2 Second stage heat turns on
0 Em Heat and fan turn off
1 Em Heat and fan turn on
2 Second stage heat turns on (Auxiliary heat)
Test
number
DONE
Press t to
select test
F
10
DONE
10
System
status
1
TEST
Press t to
change status
0
0
M29488
M32423A