Honeywell TH8320ZW1000 Installation Manual page 9

Installer setup
Setup functions
0530 Adaptive Intelli-
gent Recovery™
0540 Program periods
0580 Compressor
protection
0600 Heat temperature
range stop
0610 Cool temperature
range stop
0615 Energy Saving
Heat Setpoint
0616 Energy Saving
Cooling Setpoint
0640 Clock format
0650 Extended fan
timer (heat)
0660 Extended fan
timer (cool)
0670 Keypad lock
0680 Heat temperature
control
0690 Cool temperature
control
0700 Temperature
display offset
0710 Reset
rf10 Z-Wave Network
Connection
rf20 Z-Wave Node
Connection
Settings & Options
1 On
0 Off
4 4 program periods (Wake, Leave, Return, Sleep)
2 2 program periods (Wake, Sleep)
5 5 minute compressor off time
[Other options: 0, 1, 2, 3 or 4-minute off time]
90 Max. heat temperature setting is 90°F (32°C)
[Other options: 40-89°F (4°C to 32°C)]
50 Min. cool temperature setting is 50°F (10°C)
[Other options: 51-99°F (11°C to 37°C)]
65 65°F (18.5°C)
40-90°F (4.5°C to 32°C)
78 78°F (25.5°C)
50-99°F (10°C to 37°C)
12 12-hour time (i.e., "3:30 pm")
24 24-hour time (i.e., "15:30")
0 Off
90 Fan runs for 90 seconds after call for heat ends
[Other options: 30, 60, 120]
0 Off
90 Fan runs for 90 seconds after call for cooling ends
[Other options: 30, 60, 120]
0 Keypad unlocked (fully functional)
1 Partially locked (access to temperature settings only)
2 Fully locked
2 Standard temperature control (recommended)
1 Choose if room is warmer than set temperature
3 Choose if room does not reach set temperature
2 Standard temperature control (recommended)
1 Choose if room is cooler than set temperature
3 Choose if room does not reach set temperature
0 Thermostat displays actual room temperature
[Other options: -3, -2, -1, 1, 2, 3°F offset (-1.5°C to 1.5°C)]
0 No reset
1 Reset installer options (including Z-Wave inclusion) & program
schedule to factory default (only date and time settings are
retained)
0 Remove
1 Add
0 Idle
1 Send Node
9
(factory default in bold
TH8320ZW1000
)
69-2486—03