Table of Contents
Advertisement
LE10 Radio Receiver
2.3
Main applications
LE10 Radio Receiver as small stand alone call system
After receiving a radio signal from a programmed radio
transmitter, the relay output switches a siren or a lamp to
indicate locally a wireless call.
LE10 Radio Receiver connected to a emergency call system
via relay contact
After receiving a radio signal from a programmed radio
transmitter, the relay will be switched. This relay output is
connected to a wired emergency call system by wire and hereby
a call will be generated or forwarded.
LE10 Radio Receiver as part of a Resident Alert System
monitoring dementia
After receiving a signal from a dementia transmitter, the relay
will be activated to close a monitored door.
2.4
Description of the different modes
Mode Name
1
Normal
2
Normal, with red LED
deactivated at
battery-low indication
3
Dementia
Bosch Security Systems
Description
20 wireless transmitters can be programmed.
Calls are indicated by the red LED and Relay 1.
A battery-low signal is indicated by the red
LED and Relay 2.
The same functions as in mode 1 are available,
except for the battery-low signal which is not
indicated by the red LED, but only by Relay 2.
The MIYS37L and MIYS37E wireless
transmitters are detected. Relay 1 can be used
to lock a monitored door. Relay 2 can be used
to interrupt a monitoring loop.
User Manual
Product information | en
F.01U.278.517 | V2.0 | 2012.11
7
Advertisement
Table of Contents
