Table of Contents
Advertisement
16
en | Operation
6
Operation
6.1
Standby mode
The LE10 Radio Receiver enters standby mode when the power
supply is connected. Both relays are off. See Section 4.2.1 Mode
indication after power on, page 12.
6.1.1
Standby with no transmitter programmed
Device behavior
–
–
6.1.2
Standby with at least one transmitter programmed
Device behavior
–
–
6.2
Normal mode (modes 1 and 2)
6.2.1
Activation of a transmitter in normal mode
Device behavior
–
When a matched transmitter is activated:
–
–
–
If the same or another matched transmitter is activated within
10 seconds, the alarm will be retriggered for 10 seconds.
Device behavior when a transmitter has a low battery
–
When the transmitter is activated:
–
–
F.01U.278.517 | V2.0 | 2012.11
The green LED stays permanently on.
The red LED blinks 3 times every 10 seconds.
The green LED stays permanently on.
The red LED stays permanently off.
The green LED stays permanently on.
The red LED lights up permanently for 10 seconds.
Relay 1 switches on for 10 seconds.
Relay 2 stays off.
The green LED stays permanently on.
The red LED blinks twice for 2 seconds, then lights up
permanently for 8 seconds. It then blinks once every 10
seconds.
Relay 1 switches on for 10 seconds.
User Manual
LE10 Radio Receiver
Bosch Security Systems
Advertisement
Table of Contents
