Getting Started; Accessory List; Turning Power On And Off; Source Selection - Alpine CDE-W235BT Owner's Manual

Getting Started

SOURCE/
/ENTER
Rotary encoder
The illustration is for CDE-W235BT.
SOURCE/
/ENTER
Rotary encoder
The illustration is for CDE-W233R.

Accessory List

• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone (CDE-W235BT only).............................................1
• Mounting Sleeve ......................................................................1
• Bracket Key ...............................................................................2
• Face Plate ..................................................................................1
• Rubber Cap ...............................................................................1
• Hex Bolt.....................................................................................1
• Screw (M5 × 8) ..........................................................................4
• Owner's Manual..................................................................1 set

Turning Power On and Off

Source Selection

AUDIO/SETUP

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time,
after changing the car battery, etc.
1
2
SETUP

Adjusting Volume

Press SOURCE to turn on the unit.
Note
• The unit can be turned on by pressing any other button except .
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
Note
• The first time power is turned on, the volume will start from level 12.
Press SOURCE to change the source.
TUNER  DISC  USB AUDIO/IPOD
*3
 TUNER
AUXILIARY
Only when the iPod/iPhone is connected.
Only for CDE-W235BT.
Only when BT AUDIO is set to ON. Refer to "Setting the
BLUETOOTH Connection (BT IN)" on page 26.
Only when AUX SETUP is set to ON. Refer to "Setting the AUX
SETUP Mode" on page 23.
Turn off the unit power.
Press RESET with a ballpoint pen or similar pointed object.
RESET button
Turn the Rotary encoder until the desired sound is
obtained.
*1 *2
 BT AUDIO 
9
-EN