Indication For Ipod Mode; Bluetooth Mode (Cde-W235Bt Only) - Alpine CDE-W235BT Owner's Manual

Indication for iPod Mode

• The iPod/iPhone is not connected.
– Make sure the iPod/iPhone is correctly connected (Refer to
"Connections" on page 42).
Make sure the cable is not bent excessively.
• There are no songs in the iPod/iPhone.
– Download songs to the iPod/iPhone and connect to this unit.
• Communication error
– Turn the ignition key off, and then set to ON again.
– Reset the iPod.
– Check the display by reconnecting between the iPod/iPhone and
this unit, using the iPod/iPhone cable.
• Caused by the iPod/iPhone Software Version not being compatible
with this unit.
– Update the iPod/iPhone Software Version to be compatible with
this unit.
• The iPod/iPhone is not verified.
– Reset the iPod.
– Try another iPod/iPhone, if available.
• Power surge error
Excessive voltage/current is supplied to the iPod/iPhone.
– Try another iPod/iPhone, if available.

BLUETOOTH mode (CDE-W235BT only)

• The BLUETOOTH device is not connected.
– Connect the BLUETOOTH device.
38
-EN